When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
car is beautiful but I have to agree that grille is aweful, makes the car look some what cartoon-ish / animated now. doesn't flow well. sorry man keeping it real and honest! the oe grille looks cleaner.
been thinking about doing this soon.
Can you PM me how much they charged you for powder coating your calipers?
Originally Posted by tiguy99
been thinking about doing this soon.
Can you PM me how much they charged you for powder coating your calipers?
$75 per , it includes reassembly and mounting. You have to buy rebuild kits as well , they're cheap. @SoCal / @Bilgen, certain powders are transparent, so however the finish is , is how it will look.
in order to achieve certain finishes you have to do some work. the gold powder wouldn't POP if the calipers weren't polished
$75 per , it includes reassembly and mounting. You have to buy rebuild kits as well , they're cheap. @SoCal / @Bilgen, certain powders are transparent, so however the finish is , is how it will look.
in order to achieve certain finishes you have to do some work. the gold powder wouldn't POP if the calipers weren't polished
pics are just for reference of finish
word, like the center caps I had done in candy red.
Scored a full sized spare. Dismounted the big ole suv tire from it, cleaned it up some and test fitted it in the trunk. Going to have to go custom cutout on the lid and floor mat wheel is 18x10 should be cool though, something different. Need to have it split and refinished like the other 4 in brushed faces and polished lips.
After 1 can of polish
on the tail end of polishing calipers, preping them for powder coating
Rare SheepDog Bov, Cxracing Dp Megan mp That was Easy Finish it off with this .
wrapped half my intake , then double wrapped Intercooler hot / cold sides, downpipe and midpipe with die titanium wrap. Next is to coat pipes witfh dei silicone coating blocking all moisture n water eternally. Regains lost hp, keeps heat in , quicker spool times , Exhuast velocity up , engine head / under hood temps low , cabin temp low
Dropped off my full sized spare to have the center bore opened up to fit my adapters, split, faces brushed and cleared and the lips polished out and while I was there they told me that my center caps were all finished up. Went with the same scheme on those as the wheels. Brushed inners polished lip except had the entire cap cleared.
After 1 can of polish
on the tail end of polishing calipers, preping them for powder coating
Rare SheepDog Bov, Cxracing Dp Megan mp That was Easy Finish it off with this .
wrapped half my intake , then double wrapped Intercooler hot / cold sides, downpipe and midpipe with die titanium wrap. Next is to coat pipes witfh dei silicone coating blocking all moisture n water eternally. Regains lost hp, keeps heat in , quicker spool times , Exhuast velocity up , engine head / under hood temps low , cabin temp low.