What did you do to your GS today?
#1834
Driver
iTrader: (4)
Well no real physical modifications done today but it did just become more of my daily driver.....
Since I just purchased a 1991 Nissan GTR
http://www.s2carbonworks.com/jdmrhd19nisk2.html
I'll post a few pictures when it comes in off the trailer next to the GS. Now I have to get the turbo swap done..... Have to have my RB26DETT and a 2JZ-GTE... Best of both worlds!!!
Since I just purchased a 1991 Nissan GTR
http://www.s2carbonworks.com/jdmrhd19nisk2.html
I'll post a few pictures when it comes in off the trailer next to the GS. Now I have to get the turbo swap done..... Have to have my RB26DETT and a 2JZ-GTE... Best of both worlds!!!
#1835
Driver School Candidate
Join Date: Dec 2016
Location: Massachusetts
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Had the 18yr old headlights restored by a local detailing fellow. HUGE difference in the car's self-esteem.
Looking forward to Spring so I can address that hood.
Cheers!
Looking forward to Spring so I can address that hood.
Cheers!
#1836
Advanced
iTrader: (1)
Originally Posted by ericherm1
Well no real physical modifications done today but it did just become more of my daily driver.....
Since I just purchased a 1991 Nissan GTR
http://www.s2carbonworks.com/jdmrhd19nisk2.html
I'll post a few pictures when it comes in off the trailer next to the GS. Now I have to get the turbo swap done..... Have to have my RB26DETT and a 2JZ-GTE... Best of both worlds!!!
Since I just purchased a 1991 Nissan GTR
http://www.s2carbonworks.com/jdmrhd19nisk2.html
I'll post a few pictures when it comes in off the trailer next to the GS. Now I have to get the turbo swap done..... Have to have my RB26DETT and a 2JZ-GTE... Best of both worlds!!!
#1839
Wrapped dash vent gauge pods, radio bezel etc
Before
After
To make the gauge pods, console etc look unison , I used Di-Noc Bubinga Wood vinyl. Came out OK imo. The wife did half the wrapping
After
To make the gauge pods, console etc look unison , I used Di-Noc Bubinga Wood vinyl. Came out OK imo. The wife did half the wrapping
Last edited by LexLova; 02-07-17 at 11:24 AM.
The following users liked this post:
tiguy99 (02-08-17)
#1840
Driver School Candidate
Join Date: Dec 2016
Location: Massachusetts
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Previous owner installed LS400 brakes with 20mm spacers up front to clear the calipers, so it made the sunk rear really stand out.
Before:
Picked up another pair of 20mm spacers to even out the rear.
After:
I got the pair of 20s super cheap but if I hadn't scored them, I'd have gotten 25mm for the rear. Wonder if I should roll the dice and slip a 5mm under this 20 🤔🤔🤔
Before:
Picked up another pair of 20mm spacers to even out the rear.
After:
I got the pair of 20s super cheap but if I hadn't scored them, I'd have gotten 25mm for the rear. Wonder if I should roll the dice and slip a 5mm under this 20 🤔🤔🤔
#1843
Just did the ball joints on my 04 GS 300. Even at 142k, the old ones were good,still stiff and hard to move almost like the new ones but I am just freshening up a few suspension parts.