What did you do to your GS today?
#1937
#1938
- Removed old 19 year old purple tint and got Suntek HP Blue 50
- Added woodgrain shiftknob and ashtray
- Wired up an LED strip in my OEM 3rd brake light housing using Kyle Harty's idea but in a smaller scale. Bought the strip from superbrightleds.com
- Wash, clay bar, polish, wax
To do:
- Put TTE replica lip back on
- Swap out OEM grill for Abflug or L-Sportline Grill
- Swap out driver seat leather skins since old one has a tear
- Figure out how to fix the rear door that's stuck closed
- Swap chrome trunk bar for OEM one. Need to take the garnish off, but that sucker is stuck on there. Any tips? I got the sides "untaped" but the middle portions are harder to get under. I tried pouring some goo gone, hoping that it would do something, but nada.
- Added woodgrain shiftknob and ashtray
- Wired up an LED strip in my OEM 3rd brake light housing using Kyle Harty's idea but in a smaller scale. Bought the strip from superbrightleds.com
- Wash, clay bar, polish, wax
To do:
- Put TTE replica lip back on
- Swap out OEM grill for Abflug or L-Sportline Grill
- Swap out driver seat leather skins since old one has a tear
- Figure out how to fix the rear door that's stuck closed
- Swap chrome trunk bar for OEM one. Need to take the garnish off, but that sucker is stuck on there. Any tips? I got the sides "untaped" but the middle portions are harder to get under. I tried pouring some goo gone, hoping that it would do something, but nada.
#1939
Buy a New LS400 Calipers, Painting, New Hardware Kit, New Ceramic Pad, Callahan Rotos and Brake Line.
New Lexus letter and emblem as well.
Look Great. Very Happy with my installation, how everything fit in place without any complication. Also, the improvement when the car stops is awesome.
New Lexus letter and emblem as well.
Look Great. Very Happy with my installation, how everything fit in place without any complication. Also, the improvement when the car stops is awesome.
#1942
Do you mean the RCA Camber kit? I have those spacers several years ago in the car already. I made them myself with an extremely solid round aluminum that is used for industrial things and cut them to 30mm. I made the hole in the center and buy the reinforced screws. They have been in place for more than 3 or 4 years without any problem.
The following users liked this post:
AirRideFan (04-15-19)
#1945
Sold it
GS430 getting a little run down, long in the tooth. So, sold it and bought a 2008 Infiniti g35x with 70k miles. Pristine shape. Obviously owned by a lady who didn't even take the protective plastic off the door sill trim. The Infiniti handles so much better than the GS430. Hope it holds up as well as the GS! Thanks to all who participate in this forum. You've been a great resource to me. Good luck to you all.
If anyone is in the Boise area and would like to buy my mounted 16" wheels/snows, respond to this post.
If anyone is in the Boise area and would like to buy my mounted 16" wheels/snows, respond to this post.
#1947
Installed the TRD calipers last Saturday. Took longer than I anticipated but finally able to install both sides. Only to discover that my 20s will not fit without spacers.
Luckily one of the guys at the shop had a set that he sold me for $80. Saved me from having to put the stock calipers back on. But now my fronts are sticking out more
than my rears and I can't fully air out anymore.
Luckily one of the guys at the shop had a set that he sold me for $80. Saved me from having to put the stock calipers back on. But now my fronts are sticking out more
than my rears and I can't fully air out anymore.
#1948
Installed the TRD calipers last Saturday. Took longer than I anticipated but finally able to install both sides. Only to discover that my 20s will not fit without spacers.
Luckily one of the guys at the shop had a set that he sold me for $80. Saved me from having to put the stock calipers back on. But now my fronts are sticking out more
than my rears and I can't fully air out anymore.
Luckily one of the guys at the shop had a set that he sold me for $80. Saved me from having to put the stock calipers back on. But now my fronts are sticking out more
than my rears and I can't fully air out anymore.
#1950