Official "MODDED" CT200h picture thread!
#436
I'll post some pics of my car later when i get home from work
#437
Nice man im in moanalua area. My Works took over 6mo to come in. It wasnt because of shipping but the manufacturing process of 5x100 at the factory was ultra slow. So just a heads up if yours take longer than expected lol. That diffuser makes the rear end look so much cleaner. I cant stand the stock look... it looks like the car's butt is hanging out lol.
I'll post some pics of my car later when i get home from work
I'll post some pics of my car later when i get home from work
The diffuser definitely improves the look of the rear end, especially after I put on the exhaust. My exhaust didn't look right prior to putting on the diffuser.
I'll be looking forward to seeing what you got!
#438
Sorry for low quality pictures. The quality and lighting changes when I transfer them from my phone to my pc.. But my car ain't anything special anyway lol
My current setup:
Megan Coilovers
Megan rear camber arms / cam bolts in front
Work CR2P (19"x9.5" +16 rears; 19"x9.5" +45 fronts; 215/35r/19 Kumho tires)
12" Alpine type R powered by a Pioneer GMD8601
My current setup:
Megan Coilovers
Megan rear camber arms / cam bolts in front
Work CR2P (19"x9.5" +16 rears; 19"x9.5" +45 fronts; 215/35r/19 Kumho tires)
12" Alpine type R powered by a Pioneer GMD8601
#439
Sorry for low quality pictures. The quality and lighting changes when I transfer them from my phone to my pc.. But my car ain't anything special anyway lol
My current setup:
Megan Coilovers
Megan rear camber arms / cam bolts in front
Work CR2P (19"x9.5" +16 rears; 19"x9.5" +45 fronts; 215/35r/19 Kumho tires)
12" Alpine type R powered by a Pioneer GMD8601
Attachment 407623
Attachment 407624
Attachment 407625
Attachment 407626
My current setup:
Megan Coilovers
Megan rear camber arms / cam bolts in front
Work CR2P (19"x9.5" +16 rears; 19"x9.5" +45 fronts; 215/35r/19 Kumho tires)
12" Alpine type R powered by a Pioneer GMD8601
Attachment 407623
Attachment 407624
Attachment 407625
Attachment 407626
#440
@Miamiboy87 Ok so you don't have the stock subwoofer which is weird because I thought all the models came with one. That sucks because if the wires aren't pre-ran by factory then you'll have to pull out your head unit and see if there are subwoofer outputs. If there aren't any sub outputs then you gotta change the head unit.
Don't mind my ugly install lol (did it in 30min). I'm working on a custom box to replace the spare wheel area so I can get my trunk space back lol.
Spoiler
#441
@Miamiboy87 Ok so you don't have the stock subwoofer which is weird because I thought all the models came with one. That sucks because if the wires aren't pre-ran by factory then you'll have to pull out your head unit and see if there are subwoofer outputs. If there aren't any sub outputs then you gotta change the head unit.
Don't mind my ugly install lol (did it in 30min). I'm working on a custom box to replace the spare wheel area so I can get my trunk space back lol.
Attachment 407709
Spoiler
Attachment 407709
#442
I will be following this mod because I want a sub too and my car doesn't even have a stock sub either. the Sub was only part of the "premium audio package." We also have a filler plate in the middle of our dashboard where a speaker grill is supposed to go.
#443
@Miamiboy87 Ok so you don't have the stock subwoofer which is weird because I thought all the models came with one. That sucks because if the wires aren't pre-ran by factory then you'll have to pull out your head unit and see if there are subwoofer outputs. If there aren't any sub outputs then you gotta change the head unit.
Don't mind my ugly install lol (did it in 30min). I'm working on a custom box to replace the spare wheel area so I can get my trunk space back lol.
Attachment 407709
Spoiler
Attachment 407709
After taking that black part off
#445
#446
If I build one, it will be similar to this one:
http://www.ct200hforum.com/forum/lex...d-stealth.html
See, we are lucky because we have that useless foam piece over the spare tire that is just designed to raise the rear trunk height to match the battery pack height. I think we could actually use those hollow spaces to our advantage and have a sub on each side, and use the hollow space as a resonance chamber. Then you could drill a hole about 1.5"-2" in diameter in the carpet of the removable side panels, and a ton of base would blast out! You could probably find a chrome ring of the same diameter to make it look pro!
that is why, unlike the design above, I would put the amp in the middle, and have two 10" subs at an angle on each side. Then the resonance chambers I mentioned would work better. Then to top it all off, I would put a plexiglass window on the top at trunk height, line the wooden housing with carbon fiber vinyl, and add some blue LED's to illuminate the amp and subs... I think it would look amazing!
(Just make sure you add length to all the wires so you can remove the entire unit to get the spare tire and jack out... Ideally it could be designed with hinges or a lift mechanism but I think that is just getting too complicated!)
I feel like the moderator should think about making these posts about the sub another topic because I was just thinking it's OT.
Last edited by SteveMason; 04-15-17 at 09:59 PM.
#447
Sorry for low quality pictures. The quality and lighting changes when I transfer them from my phone to my pc.. But my car ain't anything special anyway lol
My current setup:
Megan Coilovers
Megan rear camber arms / cam bolts in front
Work CR2P (19"x9.5" +16 rears; 19"x9.5" +45 fronts; 215/35r/19 Kumho tires)
12" Alpine type R powered by a Pioneer GMD8601
Attachment 407623
Attachment 407624
Attachment 407625
Attachment 407626
My current setup:
Megan Coilovers
Megan rear camber arms / cam bolts in front
Work CR2P (19"x9.5" +16 rears; 19"x9.5" +45 fronts; 215/35r/19 Kumho tires)
12" Alpine type R powered by a Pioneer GMD8601
Attachment 407623
Attachment 407624
Attachment 407625
Attachment 407626
#448
Hi Everyone,
I've been a long time lurker here, and now I thought I should probably show myself. I bought my '15 CT F-Sport two years ago new from the dealer, and during these two years I've done a couple of mods:
Injen Intake
HKS Exhaust
F-Sport Sway bars
BC BR Coilovers
AG M240 18" Wheels (Temporary until my Work VS-XXs come in)
Modellista Front Lip Spoiler & Side Skirts
TRD Rear Bumper Diffuser
I also have the StanceParts Front Air Cup Suspension Kit, but never had the chance to install it yet.
I've also added some little touches like the OEM sun visors, clean box, cup holder plates, and rear cupholders. All OEM.
I've been a long time lurker here, and now I thought I should probably show myself. I bought my '15 CT F-Sport two years ago new from the dealer, and during these two years I've done a couple of mods:
Injen Intake
HKS Exhaust
F-Sport Sway bars
BC BR Coilovers
AG M240 18" Wheels (Temporary until my Work VS-XXs come in)
Modellista Front Lip Spoiler & Side Skirts
TRD Rear Bumper Diffuser
I also have the StanceParts Front Air Cup Suspension Kit, but never had the chance to install it yet.
I've also added some little touches like the OEM sun visors, clean box, cup holder plates, and rear cupholders. All OEM.
https://www.clublexus.com/forums/ct-...ml#post9838538
https://www.clublexus.com/forums/is-...t-now-302.html
#450