When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Liking the black front calipers with the logo.
The logo on the rear caliper looks a little odd...just my opinion. I realize real estate on the rear caliper is sparse.
Nice work on the paint though.
Liking the black front calipers with the logo.
The logo on the rear caliper looks a little odd...just my opinion. I realize real estate on the rear caliper is sparse.
Nice work on the paint though.
Thanks. Yeah the rear calipers are so puny that there's no point in highlighting them!
Thanks. Yeah the rear calipers are so puny that there's no point in highlighting them!
Just have to find a smaller Lexus logo decal so you can center it. I have a small one on my rear calipers. Barely noticeable. Highlights the rear calipers very well. Well I think it does lol.
Nice wheels!! Goes well with the caliper paint.
Did the Lexus center caps swap over directly?
I get the "caps" at 3Dcarstickers.com. Great vinyl product with a sticky back, at a cheap price. You select whatever logo you want and size.
Originally Posted by nonopeno
Corrado, welcome back!
Just wondering, any rubbing in the back with your setup? I have the same but it rubs for me (I was told perhaps it was my tires?)
Thanks! Yes it is your tires. I have the same issues where it rubs a little on big dips or with rear passengers over smaller dips. With my past IS, same spec wheels and tires (on paper), however, never had rubbing before and I know why. Tires were less square at the sidewall than my current setup. The slight 2-3 mm bend inwards makes all the difference. I will live with the rubbing for now since it doesn't happen often and it's somewhat avoidable. I also don't see it posing a safety issue as the rubbing is not harsh eating into the tire. Hope this helps!
Ohtsu FP8000 265/30/19 have a more rounded sidewall so never rubbed.
Minerva iMove 265/30/19 tires will rub where shown above because of the more squared-off side wall. Put a piece of masking tape in the fender and you will see it get marked.
Originally Posted by faisal11ir
Looking nicee
Thanks! Problem though with this high-contrast color combo is pictures are not that great unless I have a high-end camera which of course I don't (cell-phone cam). I miss USB 1.0 and is still my favorite color hands down but for some reason USB 2.0 and the refresh did not (and still does not) click with me.
Minerva iMove 265/30/19 tires will rub where shown above because of the more squared-off side wall. Put a piece of masking tape in the fender and you will see it get marked.
Ah - ok. Do you think this rubbing will cause fender damage down the road? (leading to rust perhaps?)
I have been having trouble finding out exactly where rubbing is happening, good idea about the masking tape.
Minerva iMove 265/30/19 tires will rub where shown above because of the more squared-off side wall. Put a piece of masking tape in the fender and you will see it get marked.
Ah - ok. Do you think this rubbing will cause fender damage down the road? (leading to rust perhaps?)
I have been having trouble finding out exactly where rubbing is happening, good idea about the masking tape.
Yes very possible on the rust but so far my paint appears intact.
Looking good so far! Did you buy precut tint for the tail lights or did you cut it yourself? Also how difficult was it to apply? I see people saying they had theirs sprayed instead of vinyl tinted because of the shop of our 3IS tails.