supratreo

Hi, so just got done installing Megan springs and now I have that error message. I figured I'd adjust the sensors...simple enough right? No. I made many adjustments and nothing worked. I finally just went ahead and unplugged both sensors but it's still on. Any ideas? I read that unplugging the sensors would make the headlight adjustments inop but also get rid of that light not it's still on.

Any ideas?
Thanks

whitebeast

iTrader: (5)

Did you check the arm to make sure it's correct?

whitebeast

iTrader: (5)

I mean the rear arm support to be 90degree instead of straight up

supratreo

Yes. I made all of the possible adjustments

whitebeast

iTrader: (5)

Is there any chance you could take picture of it?

msgs350

iTrader: (2)

Did you check the arm in the front as well?

supratreo

Yes that's the diagram I followed

supratreo

Shouldn't disconnecting both sensors also turn the error message off?

msgs350

iTrader: (2)

If you can, take a pic of these arms for us to look at. Disconnecting the sensor won't turn the error off, maybe pulling the fuse will but you should try to fix this issue though.

supratreo

That's what I would like to do. Would I have to use a hosting site for pics?

Bichon

No, you can just upload them here. Easiest way is to click the image button at the top of the reply box, and then just drag and drop your pics.

supratreo

supratreo

These are the best pics I could take with the wheels on. Front is angled a hair downward like in the diagram but the rear on the car does not match the diagram unless I'm not understanding it correctly.

whitebeast

iTrader: (5)

The rear is not setting correctly from the picture you are provided

whitebeast

iTrader: (5)

You set the rear downward