When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
so i just saw that only my drivers side illuminated door sill is working ,
is that normal or should they all be working??? is it a hard removal to change the led light or any lighting that needs to be changed
Hi,
Was the illuminated door sill part of the premium GX or do all the 2nd generation illuminate? I just bought a used 2013 last Dec with 75k miles and neither sill has ever lite up. Pulled off the drivers door sill to replace it due to multiple dents and I don't see any led or bulb of any kind although there's a plug I had to undo. Please see attachment. Is this some type of light or just a terminator?
I appreciate any help with this!
I removed my driver's door sill to remove a piece of Weathertech window visor that had broken off and fallen in there --I was afraid of rattling so it was important that I remove it. I did NOT see any connectors, just a loom that was neatly wrapped/taped. I slightly damaged the scuff plate itself and was considering replacing it with illuminated ones. The metal part separated from the plastic (one plastic tab had broken off), had 4 small dents, etc. I'll just leave it on until there are more dents and scratches and I'll take a look again. The truck is still too brand new.
Both front door sills seem to have a connector that connects to the factory unlit sill plates. Does this mean both of my doors have the capability of illuminated door sill plates? If so do they make rear illuminated sills I could wire up to the door open sensor button or interior dome light?
Both front door sills seem to have a connector that connects to the factory unlit sill plates. Does this mean both of my doors have the capability of illuminated door sill plates? If so do they make rear illuminated sills I could wire up to the door open sensor button or interior dome light?
The front sill plates are plug n play option. Every GX has the connectors, just plug the parts in, walla.
No idea on the rear sill plates... let us know what you find out.