Anyone use QuickJacks?
#1
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have a set of Quick Jacks (5000SLX if I remember right). It's worked great for most of my cars. Has anyone used it on the LC500 (convertible in my case).
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have the quickjack 5000tl and had to buy the extensions for the LC500. I love them and about to use them next week to do my oil change and install some spacers on a coupe.
The following users liked this post:
LS460SC430 (Today)
#4
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Does the 3 inches on either side really make that much of a difference? Even for a unibody vehicle? I've used my quickjack without extensions for my Kia Stinger... it's close but not on the exact lift points and seems to work fine.
#5
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Yeah, huge difference. The pinch weld points are very specific on some cars (definitely the LC), and the standard platform wont allow the blocks to reach them.
For vehicles that have the exposed pinch rail the whole length of the car it's probably not a big deal and you can be slightly off, but for cars like the LC that have a bunch of lower shields and coverings you don't have much wiggle room for where the blocks can be placed. I found that the blocks are the perfect width for the exposed area.
Side note for others: I'd never use the quickjack on anything but the pinch welds (and blocks that have grooves in them).
For vehicles that have the exposed pinch rail the whole length of the car it's probably not a big deal and you can be slightly off, but for cars like the LC that have a bunch of lower shields and coverings you don't have much wiggle room for where the blocks can be placed. I found that the blocks are the perfect width for the exposed area.
Side note for others: I'd never use the quickjack on anything but the pinch welds (and blocks that have grooves in them).
#6
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Yeah, huge difference. The pinch weld points are very specific on some cars (definitely the LC), and the standard platform wont allow the blocks to reach them.
For vehicles that have the exposed pinch rail the whole length of the car it's probably not a big deal and you can be slightly off, but for cars like the LC that have a bunch of lower shields and coverings you don't have much wiggle room for where the blocks can be placed. I found that the blocks are the perfect width for the exposed area.
Side note for others: I'd never use the quickjack on anything but the pinch welds (and blocks that have grooves in them).
For vehicles that have the exposed pinch rail the whole length of the car it's probably not a big deal and you can be slightly off, but for cars like the LC that have a bunch of lower shields and coverings you don't have much wiggle room for where the blocks can be placed. I found that the blocks are the perfect width for the exposed area.
Side note for others: I'd never use the quickjack on anything but the pinch welds (and blocks that have grooves in them).
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
Thread
Thread Starter
Forum
Replies
Last Post