Got da socks on!
#16
Thread Starter
Lexus Fanatic
iTrader: (20)
Joined: Feb 2001
Posts: 75,486
Likes: 2,556
From: Present
Originally posted by Mr Johnson
Byootifull Big Black Brakes...
Me Likey...
Can't wait for your impressions. BTW: What pads did you end up getting?
Byootifull Big Black Brakes...
Me Likey...
Can't wait for your impressions. BTW: What pads did you end up getting?
Last edited by bitkahuna; 10-29-03 at 06:46 PM.
#18
THAT is a beautiful sight! Funny, I just installed my 14" StopTech kit on Sunday (red calipers, X-drilled)... so far, I love them!
Just be sure to follow the break-in procedure- I am still paranoid about leaving my foot on the brake and intersections (to avoid pad deposition onto the rotor). I haven't really hammered them yet, but you can feel the amount of potential stopping power even during normal braking. I did the X-drilled OE size rear rotors, pads, and brake lines too. Nothing to it- a pretty easy install, but I took my time.
StopTech: "Supercharging for your brakes..."
Looks terrific!!
-Bob
Just be sure to follow the break-in procedure- I am still paranoid about leaving my foot on the brake and intersections (to avoid pad deposition onto the rotor). I haven't really hammered them yet, but you can feel the amount of potential stopping power even during normal braking. I did the X-drilled OE size rear rotors, pads, and brake lines too. Nothing to it- a pretty easy install, but I took my time.
StopTech: "Supercharging for your brakes..."
Looks terrific!!
-Bob
#30
Thread Starter
Lexus Fanatic
iTrader: (20)
Joined: Feb 2001
Posts: 75,486
Likes: 2,556
From: Present
For those interested in the brake weights, I got info directly from StopTech. Here's what the guy described as 'approximate weights':
ST-40 caliper w/o pads = ~8.25lbs
Typical 355 rotor & hat assembly = ~15.50lbs
Typical caliper bracket = ~1.0lbs
Pads = ~1.0lb each
Lines = Same as the stock line
ST-40 caliper w/o pads = ~8.25lbs
Typical 355 rotor & hat assembly = ~15.50lbs
Typical caliper bracket = ~1.0lbs
Pads = ~1.0lb each
Lines = Same as the stock line