Need advice for SC400
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2004
Location: Alabama
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Need advice for SC400
I just bought a "new" 92 sc400 and have to replace the rotors on it. Should I buy some of the cross drilled and slotted set's from ebay, get genuine, or autozone specials? I don't want to break the bank, after all I already have 175,000 miles on the car.
#2
Pole Position
one question are you planning on getting larger wheels?...aka bigger than stock?
CEO
CEO
#3
Driver School Candidate
Thread Starter
Join Date: Aug 2004
Location: Alabama
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
No, I'm going to leave the stock wheels and tire size. The car runs great but the brakes shimmey a little when you are stopping. Autozone wants around $70.00 per rotor. Ebay, you can buy all four rotors (drilled and slotted only, I believe) for around $170.00 including shipping. The ads say that they are new rotors not reman or just turned (who knows for sure).
#4
Racer
iTrader: (1)
Join Date: Feb 2003
Location: Massachusetts
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Your best bet would be just to buy "Brembo blanks." These are basic, non-slotted, non-drilled rotors made by brembo. They offer similar stock performance and I believe only go for like 60-70 each or something? check them out at tirerack.com in the brakes section.
#6
Pole Position
ok before i give you some advice you need to do a search...people did comparisons between slotted and cross drilled i cant remember which was better...really a supra brake upgrade is the way to go..but you cant keep your stock wheels..you have to go large to clear the big 4 piston brake.
CEO
CEO
#7
Lexus Test Driver
Join Date: Feb 2004
Location: California
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for SC400
Originally posted by usm
I just bought a "new" 92 sc400 and have to replace the rotors on it. Should I buy some of the cross drilled and slotted set's from ebay, get genuine, or autozone specials? I don't want to break the bank, after all I already have 175,000 miles on the car.
I just bought a "new" 92 sc400 and have to replace the rotors on it. Should I buy some of the cross drilled and slotted set's from ebay, get genuine, or autozone specials? I don't want to break the bank, after all I already have 175,000 miles on the car.
Thread
Thread Starter
Forum
Replies
Last Post
Phiber
Suspension and Brakes
42
08-03-09 11:24 AM
oldblue
Suspension and Brakes
1
05-07-03 05:41 PM