Tein Basics Installed w/Pics
#1
Lexus Test Driver
Thread Starter
Tein Basics Installed w/Pics
I finally got my Tein Basic coilovers in from Carson Toyota (Thanks Steve). Those guys are great to deal with. It took me about 2 hours by myself with the help of a lift and air tools at my friends shop. The ride is definitely stiffer than stock, but it's amazingly smooth considering the drop. I got the Teins for $660 shipped to my door and I used my stock upper mounts since they were in really good shape. I didn't take any pics of the install because there are already a few 'How To's' here, but I do have before and after shots.
Before:
And After:
Before:
And After:
#3
Lexus Test Driver
Thread Starter
Oh no, it can go lower. There's 1 1/8" left of threads on the strut all around. It's also going to settle some more over the next few weeks.
Trending Topics
#8
yeah i believe the car will drop significantly more during the 1st week of driving. after installing my tokico illuminas, it dropped another 50% after two days of driving. GL
#10
Lexus Champion
iTrader: (2)
Mine on our on now too. Sorry if I'm jacking your thread haha
The fronts are a real pain in the butt. rears were cake
took about 4hrs with no air tools. You can go very low with the basics, at first I had the front all the way down and I could barely put a credit card between the tire and the fender !
I have about 1 finger gap all around which is perfect for me. Ride is firm but liveable for daily driving.
The fronts are a real pain in the butt. rears were cake
took about 4hrs with no air tools. You can go very low with the basics, at first I had the front all the way down and I could barely put a credit card between the tire and the fender !
I have about 1 finger gap all around which is perfect for me. Ride is firm but liveable for daily driving.
Last edited by AME_VIP; 04-20-05 at 06:20 PM.
Thread
Thread Starter
Forum
Replies
Last Post
is250manny
Suspension and Brakes
23
03-18-08 01:21 PM