LS Brakes= to TT brakes?
#17
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Originally Posted by RMMGS4
Yup, they are LS400 rotors.
I test fitted TT rotors, but they were slightly too big.
Not sure were he ordered them from. I'll try to reach im. He's not on the forums lately cause he's trying to graduate soon.
I test fitted TT rotors, but they were slightly too big.
Not sure were he ordered them from. I'll try to reach im. He's not on the forums lately cause he's trying to graduate soon.
#22
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Okay RMMGS4 convinced me to log in for a bit and respond....didn't know these brakes have become such a hot topic of late. Don't have much time to discuss but I'll post some pics that ya'll haven't seen before.
Here's a pic of the bolt that was shaved off.
Here's a pic of the bolt that was shaved off.
#23
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
also heard about a mystery bracket for these brakes. Here's a profile shot of my setup using no brackets. If someone had brakcets made then I would assume that the placement of the caliper with respect to the rotor would be different.
This is the best shot I could take for now...didn't want to take the car out of the garage otherwise I might be tempted to clean the car, and I just don't have time for that anymore.
This is the best shot I could take for now...didn't want to take the car out of the garage otherwise I might be tempted to clean the car, and I just don't have time for that anymore.
#25
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Thank you very much for logging on ......
in that pic which bolt is shaved off?
and the rotors you bought from Irotors are what size?
my email is emanriquez@southlandcu.org...Thanks guys![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
my rims are 20X8.5 w/ a 35 offset
in that pic which bolt is shaved off?
and the rotors you bought from Irotors are what size?
my email is emanriquez@southlandcu.org...Thanks guys
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
my rims are 20X8.5 w/ a 35 offset
#26
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Originally Posted by LEXISM
Thank you very much for logging on ......
in that pic which bolt is shaved off?
and the rotors you bought from Irotors are what size?
my email is emanriquez@southlandcu.org...Thanks guys![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
my rims are 20X8.5 w/ a 35 offset
in that pic which bolt is shaved off?
and the rotors you bought from Irotors are what size?
my email is emanriquez@southlandcu.org...Thanks guys
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
my rims are 20X8.5 w/ a 35 offset
The nut you see with the cotter pin is shaved. You can't see the shaved part from the angle of the photo, but it's pretty much the part you don't see is what's shaved. This was an old pic he dug up. One of these days he'll have to take the wheel off and show the right angle. Till then thats all he has.
Check your e-mail for the TT template. Jawnthen said if the TT clears then the LS will clear for sure.
Sounds like your real close.
#28
Lexus Champion
iTrader: (4)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Originally Posted by rominl
thanks for teh info, jon. but as far as i know no one is making brackets for the ls400 brakes. i think someone is making brackets for the ls430 calipers though
![Wink](https://www.clublexus.com/forums/images/smilies/wink.gif)