Ls400 brake on Sc
#2
Originally Posted by Gs L-tune
Finally i get a chance to install my LS400 brake on my SC. Very similiar to Supra TT capiler lil small though. Will take some pix to show you guys soon.
I went to have it done yesterday, but I think I should order the LS sheilds..
What are you doing regarding your shields.
Trending Topics
#8
Oh crap, the 95+ LS400 calipers causes clearance issues? I have them sitting in my garage and I'm installing them this weekend. Am I going to run into problems? I run 18" with +42 offset (it was from my FF car).
#9
Originally Posted by 97Soarer
Oh crap, the 95+ LS400 calipers causes clearance issues? I have them sitting in my garage and I'm installing them this weekend. Am I going to run into problems? I run 18" with +42 offset (it was from my FF car).
Here's a way you can tell...with your 18s right now, check how far your spokes are to the caliper. If they're pretty darn close, i doubt it'll fit.
#10
Originally Posted by 97Soarer
Oh crap, the 95+ LS400 calipers causes clearance issues? I have them sitting in my garage and I'm installing them this weekend. Am I going to run into problems? I run 18" with +42 offset (it was from my FF car).
#14
I looked at the current clearance. I have about 0.50 inch clearance from the highest point of the caliper to the rim. But I noticed that LS and SC calipers look different.
SC caliper has this quarter circle thing that protrudes out, I think it's called the "carrier," the part where the brake pads attach to. It is this part that is closet to the rim. I know the LS400 with it's 4 piston don't have this. It's so hard to explain, anyone have the shop manual pictures of the SC300 front brake system and the 95+ LS400 front brake?
SC caliper has this quarter circle thing that protrudes out, I think it's called the "carrier," the part where the brake pads attach to. It is this part that is closet to the rim. I know the LS400 with it's 4 piston don't have this. It's so hard to explain, anyone have the shop manual pictures of the SC300 front brake system and the 95+ LS400 front brake?
#15
Originally Posted by 97Soarer
I looked at the current clearance. I have about 0.50 inch clearance from the highest point of the caliper to the rim. But I noticed that LS and SC calipers look different.
SC caliper has this quarter circle thing that protrudes out, I think it's called the "carrier," the part where the brake pads attach to. It is this part that is closet to the rim. I know the LS400 with it's 4 piston don't have this. It's so hard to explain, anyone have the shop manual pictures of the SC300 front brake system and the 95+ LS400 front brake?
SC caliper has this quarter circle thing that protrudes out, I think it's called the "carrier," the part where the brake pads attach to. It is this part that is closet to the rim. I know the LS400 with it's 4 piston don't have this. It's so hard to explain, anyone have the shop manual pictures of the SC300 front brake system and the 95+ LS400 front brake?