Daizen Control Arm Bushing Kit!!!!
10-07-05, 10:49 AM
#16
Originally Posted by GS430lvr
rominl: I ordered a set as well, going to have TM install them with my L-tuned s/s. Haven't inspected the condition of the stock bushings, but with 90,000 miles I would assume they are ready, right?! It would sure be nice to eliminate the constant alignments needed to reduce inner tire wear, the shakes at 60mph, and the car tring to follow every crack in the road when braking!
Fingers crossed!
Fingers crossed!
my car has 70k miles and the bushings were shot already, so with 90k miles, unless you drive very mildly on super clean road, i think it's about time. it's for the better anywaythe only "unknown" is that i lowered my car since 30k miles but you are just doing it. after you lower the car you definitely put more stress on the bushings
10-07-05, 10:57 AM
#17
Lexus Champion
iTrader: (2)
Join Date: Jun 2005
Location: Vancouver BC Canada
Posts: 2,174
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rominl
i wouldn't be surprised if installation is around 500 bucks. it's a lot of time and effort
how much for oem arms with the bushings already installed?
10-07-05, 11:32 AM
#18
Originally Posted by Benjamin T
yeowch!
how much for oem arms with the bushings already installed?
how much for oem arms with the bushings already installed?
castor arms 125 approx a piece lower control arms 175 approx a pice
$600 apporx for stock arms and bad no perf stock bushings that will wear out in a year or less
do the daizens and i might can do the swap out for you
10-07-05, 11:39 AM
#19
Lexus Champion
iTrader: (2)
Join Date: Jun 2005
Location: Vancouver BC Canada
Posts: 2,174
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lexforlife
castor arms 125 approx a piece lower control arms 175 approx a pice
$600 apporx for stock arms and bad no perf stock bushings that will wear out in a year or less
do the daizens and i might can do the swap out for you
$600 apporx for stock arms and bad no perf stock bushings that will wear out in a year or less
do the daizens and i might can do the swap out for you
so... do u buy the daizens and install them into your stuff and ship them to me (after i pay u for labor and the bushings), and then i send mine back (at my expense of course) as cores when i get them into the car?
Last edited by Benjamin T; 10-07-05 at 01:25 PM.
10-07-05, 02:20 PM
#21
Ed- count me in line too!
I'm down for the swap program.
Good luck with the z06 this weekend and don't forget to take photos.
I already have my daizen bushings - still in the box. Lemme know where I need to send them and they'll be on their way.
Clifford
Good luck with the z06 this weekend and don't forget to take photos.
I already have my daizen bushings - still in the box. Lemme know where I need to send them and they'll be on their way.
Clifford
10-08-05, 03:09 AM
#22
Forum Administrator
iTrader: (2)
Originally Posted by lexforlife
by early next week i should answer all who inquired .. i have a spare set of castor arms and a spare set of lower control arms so the price would include doing both..
Check your PM please.
10-11-05, 11:30 AM
#26
Forum Administrator
iTrader: (2)
Originally Posted by cliffud
is Ed not allowed to do something like this???
If that's the case, I'll just go ahead and have my local shop do it.
If that's the case, I'll just go ahead and have my local shop do it.
Thread
Thread Starter
Forum
Replies
Last Post
aarondds
Suspension and Brakes
2
10-06-10 03:47 AM
