Lowering with Supra Setup
10-15-05, 07:53 AM
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2005
Location: Florida
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Lowering with Supra Setup
Anyone using any type of camber correction when using the Supra TT struts and a sping liek the Tein STechs (1.2 drop) or the Eibach Kit (1.1 drop). Either of these combined with the TT struts give the car an overall drop of about 2.2 inches.
I am just wondering if this can be adjusted out camber wise with the stock components or should I purchase an aftermarket kit, if one is available.
I am just wondering if this can be adjusted out camber wise with the stock components or should I purchase an aftermarket kit, if one is available.
10-15-05, 09:35 AM
#2
I have Eibach springs for the Supra TT with Supra shocks on my SC and I definately needed a camber kit.
You can pick up a Daizen camber kit here: http://www.tmengineering.net/suspens...zen/index.html
You can pick up a Daizen camber kit here: http://www.tmengineering.net/suspens...zen/index.html
10-15-05, 11:32 AM
#3
Driver School Candidate
Thread Starter
Join Date: Sep 2005
Location: Florida
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Tein H-Techs for the supra only lower 0.5f / 0.4r, for a total drop of 1.5".
Is it possible to have that adjusted out with factory adjustments?
Is it possible to have that adjusted out with factory adjustments?
Thread
Thread Starter
Forum
Replies
Last Post
