Brembo Big Brake Teaser...
03-16-06, 03:32 PM
#1
Brembo Big Brake Teaser...
Just got these in today, I'll save the full details after its done. I don't think anyone has ever done what I'm doing here yet, so it'll be an "interesting" setup...
enjoy!
enjoy!
Last edited by ACleanSC4; 03-16-06 at 03:44 PM.
03-16-06, 05:59 PM
#7
Originally Posted by neuro4you@
Yea man, The first Boeing 747 to a Lexus SC brake retrofit!!! that'll be awesome!!!! 
I'll unveil the full details if/once it gets finished...oh yeah, the rear calipers are identical to the fronts!
Trending Topics
03-16-06, 06:13 PM
#9
Originally Posted by ACleanSC4
how'd you know!!!
I'll unveil the full details if/once it gets finished...oh yeah, the rear calipers are identical to the fronts!
I'll unveil the full details if/once it gets finished...oh yeah, the rear calipers are identical to the fronts!
If they are the exactly the same caliper, piston sizer & rotor size F & R , then you are going to have way too much rear brake bias, unless you have a proportioning valve.
If that's the case, then this is a real dangerous combo.
There may be a good reason why it's never been done before.
Kids, don't try this at home.
03-16-06, 07:22 PM
#10
If they are the exactly the same caliper, piston sizer & rotor size F & R , then you are going to have way too much rear brake bias, unless you have a proportioning valve.
If that's the case, then this is a real dangerous combo.
There may be a good reason why it's never been done before.
If that's the case, then this is a real dangerous combo.
There may be a good reason why it's never been done before.
I still wanna see it on the car
03-16-06, 08:56 PM
#11
Originally Posted by RMMGS4
If they are the exactly the same caliper, piston sizer & rotor size F & R , then you are going to have way too much rear brake bias, unless you have a proportioning valve.
If that's the case, then this is a real dangerous combo.
There may be a good reason why it's never been done before.
Kids, don't try this at home.
If that's the case, then this is a real dangerous combo.
There may be a good reason why it's never been done before.
Kids, don't try this at home.
Yes, if you don't have a competent mechanic, please do not try this at home...good thing I live in SoCal and Todd is the best one around...
03-16-06, 11:05 PM
#12
Racer
Yep, Todd's da man.
I know you want to save the full details until after its done, but at least clue us in to the plan- do the bolt holes line up?
If not, do you plan to make a bracket, or drill the caliper and/or hub assembly to make it fit?
I know you want to save the full details until after its done, but at least clue us in to the plan- do the bolt holes line up?
If not, do you plan to make a bracket, or drill the caliper and/or hub assembly to make it fit?
