Just4show

Does anyone know or have Turbo Supra TRD Front Strut tower brace on SC. I want to know would it fit on sc3/sc4

Boostshakalaka

u should probably try the seach function there's like a milion stb threads with spacer part numbers and all that good stuff

kietlander

it does fit but u will need spacers for it to clear the stock intake manifold. UNLESS u have a swap and it will clear no problem.

Just4show

thx for the info.

Notorious

So Supra STBs will clear the 1JZ just fine?

neurocity

iTrader: (17)

most STB's clear that motor

over40driv

I am also in search of the best STB for my sc400, intellectual.net has a subtopic under their susp. topic that explains some requirements when using the supra TRD STB, they recommend a lot of mods. for proper inst. I am hoping to go with the carbing brand which is still in dev. for our cars, I have sent an e-mail asking to be notified when ready. you can see it on www.tein.com. I have a similar thread on this page defore I saw yours, let me know what you think.

neurocity

iTrader: (17)

I searched....this is everything I've found....Look around in here.

http://www.l-tunedparts.com/model/st...=7&model_id=25

http://www.horsepowerfreaks.com/perf...trut_Tower_Bar

http://www.do-luck.com/index1_2.html

http://www.takakaira.com/

mrhappi

I have a trd stb that was made specifically made for the toyota supra. Pics

over40driv

Did it require any spacers or mods. to install?

Sly Guy Yu

go for the carbing. The best quality STB you can buy. I have the sc400 and it fits fine. Not sure about the sc300's but i sold one to gs4ac, and it fit perfectly. So check those out. You can also use edfc and it has the master cylinder stopper.

over40driv

Sly guy, can you tell me what edfc stands for?

DriftGirl

iTrader: (6)

Electronic Damping Force Controller

Boostshakalaka

edfc..... man you guys are so lazy

over40driv

Can anybody clue me in to the best place to check on an edfc? Man whats the overall set-up on emeralds 400 ?