95+ ls400 brakes DON'T work on 92' sc400
01-11-07, 05:18 AM
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2006
Location: fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
95+ ls400 brakes DON'T work on 92' sc400
Correction, research and thinking will eliminate this problem.
Sorry guys for the confusion
Sorry guys for the confusion
Last edited by sc400injen; 01-23-07 at 06:53 PM. Reason: I was too quick to post, should've thought first
Trending Topics
01-11-07, 07:18 AM
#9
Driver School Candidate
Thread Starter
Join Date: Mar 2006
Location: fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
umm
the rotors might be too big
one thing though, the position of the bolt pattern on the sc did position my calipers more to the upper left in relation to the rotor than depicted in your post. yours ended totally horizontal. there are only two bolt females that it can bolt to or am i missing something.
any help would be greatly appreciated
Tony
one thing though, the position of the bolt pattern on the sc did position my calipers more to the upper left in relation to the rotor than depicted in your post. yours ended totally horizontal. there are only two bolt females that it can bolt to or am i missing something.
any help would be greatly appreciated
Tony
01-11-07, 01:33 PM
#13
Driver School Candidate
Thread Starter
Join Date: Mar 2006
Location: fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
???
the rotors are roughly 12 and seven sixteenths" so 12.4, but i can't send pics right now cuz photobucket is f@#@# up right now.
i know the way that it would've bolted, but it wasn't close to the position of yours, it was at 9 o'clock
while yours being at 6 o'clock, or straight vertical, like it is stock on an ls400, but mine are not like, that they're positioned 25-35 degrees higher, clockwise.
it's a 92' first gen. did they make any diff. setups? because the ls caliper bolts to where the bolts go for the pad housing, then, on a stock sc4, the caliper bolts to that. when i can send pics i will, i appreciate the help
i know the way that it would've bolted, but it wasn't close to the position of yours, it was at 9 o'clock
while yours being at 6 o'clock, or straight vertical, like it is stock on an ls400, but mine are not like, that they're positioned 25-35 degrees higher, clockwise.
it's a 92' first gen. did they make any diff. setups? because the ls caliper bolts to where the bolts go for the pad housing, then, on a stock sc4, the caliper bolts to that. when i can send pics i will, i appreciate the help
