On with the TT brakes, Roll the fenders, 20's are here.
#1
Thread Starter
Lexus Test Driver
iTrader: (33)
Joined: Jul 2004
Posts: 5,827
Likes: 4
From: Sideways on the Yellow Brick Road! < Thats KS!
On with the TT brakes, Roll the fenders, 20's are here.
I have been working on installing some parts I have laying around. I made a wear plate to protect the wire harness so I can get the drop I am after. See below
#2
Thread Starter
Lexus Test Driver
iTrader: (33)
Joined: Jul 2004
Posts: 5,827
Likes: 4
From: Sideways on the Yellow Brick Road! < Thats KS!
Its hard to tell here but the front fenders are rolled and ready for my 20's. I'm glad theres not much to see here, Otherwise the fenders would look like $h1t. LOL
#4
Thread Starter
Lexus Test Driver
iTrader: (33)
Joined: Jul 2004
Posts: 5,827
Likes: 4
From: Sideways on the Yellow Brick Road! < Thats KS!
TT brakes, Painted Decaled cleared.
AXXIS pads
SS brake lines
IRotors
Tien HA's
Rears are next for rolling, SS lines, Irotors, and painted calipers.
Pics with the new 20"s coming soon!~
AXXIS pads
SS brake lines
IRotors
Tien HA's
Rears are next for rolling, SS lines, Irotors, and painted calipers.
Pics with the new 20"s coming soon!~
Last edited by ScottURnot; 03-07-07 at 08:51 PM.
#5
I wanna see 20s..because I would never get 20s, but lately seems like lots of 20s for sale--good deal.
But everyone says, SC without kit and 20s look horrid. I am the anti kit person, so wondering. Appreciate the help.
But everyone says, SC without kit and 20s look horrid. I am the anti kit person, so wondering. Appreciate the help.
#6
Thread Starter
Lexus Test Driver
iTrader: (33)
Joined: Jul 2004
Posts: 5,827
Likes: 4
From: Sideways on the Yellow Brick Road! < Thats KS!
I should have pics up by this weekend. I hope everyone is wrong! I just spent a wad a cash on these to find out. I think the secret is in going low enough to make it work. I will post pics here as soon as I have them installed.
Trending Topics
#12
Thread Starter
Lexus Test Driver
iTrader: (33)
Joined: Jul 2004
Posts: 5,827
Likes: 4
From: Sideways on the Yellow Brick Road! < Thats KS!
I wish! I'm setting here are my desk with a 20" Work Rezax II right at the end of my desk. Taking them after work to get tires put on. You know how hard it is to set by this wheel all day and focus on work?
#13
Scott,
Since you are the 20inch expert (man that sounds like a nasty **** movie)
What are your thoughts on this?
20x9 +30 with 255/35/20 and the rear is 20x10.5 +29 with 285/30/20.
What do you think of this setup?
Since you are the 20inch expert (man that sounds like a nasty **** movie)
What are your thoughts on this?
20x9 +30 with 255/35/20 and the rear is 20x10.5 +29 with 285/30/20.
What do you think of this setup?
#14
Thread Starter
Lexus Test Driver
iTrader: (33)
Joined: Jul 2004
Posts: 5,827
Likes: 4
From: Sideways on the Yellow Brick Road! < Thats KS!
On the rears the tires you spaced are 1” taller than stock. You can probably get away with the extra height but that width and offset bothers me. My rears are 20x10 +35 and the wheel sets flush with the outmost fender lip. You would most likely need to pull the fenders and run negative camber to pull it off. I currently have a set of 255/35/20 (same as your proposed fronts) tires on the rears and they look huge. I would like to get a set of 285/25/20’s which are .1 shorter than stock but $$$$ is slowing me down.
By this weekend I will have Facts and pictures to back it all up. So many people have said “They will be a easy Fit” I’m not seeing that, while others say “they wont fit” I’m not buying into that either. Watch for a follow up this Saturday or Sunday, no more maybes, might, should, probably, won't, Just the facts, soon.
#15
By this weekend I will have Facts and pictures to back it all up. So many people have said “They will be a easy Fit” I’m not seeing that, while others say “they wont fit” I’m not buying into that either. Watch for a follow up this Saturday or Sunday, no more maybes, might, should, probably, won't, Just the facts, soon.
BTW: I think 285/25's would be hot!
-craig