jet119

Hi guys, I just got this mod done, installed front and rear IS350 brake system onto a 250, afterwards took the car to bed in the brakes and WOW...what a huge difference!!! especially with the SS lines and new ATE brake fluid.
The install was straight forward except the rear required some modification to the backing plate for the rotors to fit properly. I took some before and after pics while the car was in the shop getting it done.

here are the rotor size increase between the two,

IS350- Front @ 334 mm and Rear @ 310 mm

IS250- Front @ 296 mm and Rear @ 291 mm

special thanks to parts manager Mr. Lee Moorse at Rallye Lexus.

Before,

jet119

another before picture,

jet119

after, L/F corner with wheel on....

jet119

R/R wheel area, the backing plate had to be modified for the rotor to fit properly.

t.is350.h

iTrader: (3)

Nice work..Where did you guy get those ss line?

jet119

I got them from Stop Tech... here's a link to the picture i took a while back.

https://www.clublexus.com/forums/sho...t=track+wheels

Dj_AmtraX

iTrader: (2)

How much did the whole kit cost? I can understand why you want the 350 calipers, but I don't see how the lines will make any difference. Please explain.

t.is350.h

iTrader: (3)

I check stoptech and they don't have it.

sinister2c

wish i could find some IS350/GS350 brake parts....big bling factor especially behind big wheels.

jet119

Mainly for improved brake feel, steel braided lines does not allow as much line expansion as the rubber hoses does. I did it mainly for trackdays, if i was only going to drive around the streets with it then I wont even bother to change it. stock IS250 brakes are plenty for daily driving.

jet119

here are the part numbers from stoptech.

front 85.523.4500

rear 85.523.5500

i called and placed the order over the phone. maybe it has not been updated at their website yet. hope this helps

ABC

What was the price on everything? Nice job!

t.is350.h

iTrader: (3)

Thanks for the info jett

lexem

I had SS brake lines on my last car and I loved it. The braking changed for the better. The peddle felt firm. When applying lots of brake pressure, from about 130mph down to 50mph for a turn the peddle still felt really firm. I can't wait to get these for my IS.

lobuxracer

iTrader: (2)

FWIW, I checked my TT Supra brake line kit from Goodridge ($89 from Upscale Auto) to see if it will fit the IS350. Not a chance. The rears would work but the fronts are so far off it isn't even a thought.