Tein Strut Tower Bars Review
#1
Rookie
Thread Starter
Join Date: Jun 2007
Location: Japan/USA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Tein Strut Tower Bars Review
So I was out to see what I wanted to buy for strut towers. I currently have the Tein CS and also just picked the Tein’s EDFC. So sticking to a theme of Tein, I bought there front and rear strut tower bars. My first thoughts when opening the box and looking at them were “these things are huge!” I know the Aristo is a large car but I have never seen such large strut tower bars. None the less, they seem to be of good quality and at a price of around $100 per bar, best $ for $. Installation was about a half an hour. In the front, the engine cover did need to be removed for clearance issues. In the rear two small cuts were needed in the liner. The true only issue I had was in the rear. Due to the space, it was hard to tighten the last nuts/allens on top of the bar. I look forward to finishing the suspension with the TRD sways and shooting some videos in the canyons. Next week I hope to finish my HKS Carbon Ti 3 ½ piping single sided with the Japanese backing light on the other side in preparation for my HKS 2jz-gte. Over all, if your looking for strut tower bars, this is a positive buy. Happy Tuning!
Type A
Type A
Last edited by Type A; 07-11-07 at 07:37 PM.
#7
Rookie
Thread Starter
Join Date: Jun 2007
Location: Japan/USA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
PS: in the first pic thats a 170mm shell and 120mm HKS tip
Trending Topics
#8
Lexus Champion
iTrader: (4)
No, I'm not talking about your pics. I am talking about the pics I have seen on other websites that have them for sale. The pics they have make the stb look like they are as thick as a toothpick Your pics are good because they show exactly how thick the stb really is. Not dissing your pics at all