Braking System Toyota Supra Turbo 93-98 at the Lexus SC 300-97.
#1
Driver
Thread Starter
Braking System Toyota Supra Turbo 93-98 at the Lexus SC 300-97.
All lovers Lexus SC 300 - hello.
I want to install into your Lexus SC 300-97 with a wheel disc of 17" braking system, Toyota Supra Turbo 93-98.
I have already bought:
Front and rear stock caliper Supra Turbo 93-98 for wheel discs at 17". Photo Applicant;
sets of brake pads firm "ENDLESS" on the front axle brands - SSS with the working temperature of 0-500 º C to the rear axle brand - with the working temperature SSY 0-400 º C;
reinforced brake hoses by "Рroject-M";
disassembled front brake Slotted Rotor (323 x 30mm). firm "R-roject M" for Toyota Supra Turbo 93-98.
Now I want to buy a rear brake Rotor (324 x 16 mm.).
I found in the United States at the company "Vividracing" rear brake rotors Drilled & Slotted for Supra T 93-98: http://www.vividracing.com/catalog/i...e/5/class_8/39 / my_type_id/8/class_9/430
Rear brake rotors:
Cod - R.44105.1C - Rotora Rear Left Drilled & Slotted Rotor Toyota Supra T 93-98 = $ 148.99;
Cod - R.44105.2C - Rotora Rear Right Drilled & Slotted Rotor Toyota Supra T 93-98 = $ 148.99.
The website company "Vividracing" no information on the size of the rotors.
I have a bad English. I really tried, and the company wrote a letter to managers "Vividracing", but did not receive a direct answer to your question - those Rear brake rotors: Cod - and R.44105.1C Cod - R.44105.2C correspond to the rear stock caliper Supra Turbo for use 93-98 with the wheel disc at 17" ???
Perhaps the managers of the company "Vividracing" ponimyut my letter is not to bad English and could not give me the right answer.
I am grateful to all those who tell me their opinion.
Thank you very much for your attention to my concerns.
Regards, Vadim.
buena@mail.ru
I want to install into your Lexus SC 300-97 with a wheel disc of 17" braking system, Toyota Supra Turbo 93-98.
I have already bought:
Front and rear stock caliper Supra Turbo 93-98 for wheel discs at 17". Photo Applicant;
sets of brake pads firm "ENDLESS" on the front axle brands - SSS with the working temperature of 0-500 º C to the rear axle brand - with the working temperature SSY 0-400 º C;
reinforced brake hoses by "Рroject-M";
disassembled front brake Slotted Rotor (323 x 30mm). firm "R-roject M" for Toyota Supra Turbo 93-98.
Now I want to buy a rear brake Rotor (324 x 16 mm.).
I found in the United States at the company "Vividracing" rear brake rotors Drilled & Slotted for Supra T 93-98: http://www.vividracing.com/catalog/i...e/5/class_8/39 / my_type_id/8/class_9/430
Rear brake rotors:
Cod - R.44105.1C - Rotora Rear Left Drilled & Slotted Rotor Toyota Supra T 93-98 = $ 148.99;
Cod - R.44105.2C - Rotora Rear Right Drilled & Slotted Rotor Toyota Supra T 93-98 = $ 148.99.
The website company "Vividracing" no information on the size of the rotors.
I have a bad English. I really tried, and the company wrote a letter to managers "Vividracing", but did not receive a direct answer to your question - those Rear brake rotors: Cod - and R.44105.1C Cod - R.44105.2C correspond to the rear stock caliper Supra Turbo for use 93-98 with the wheel disc at 17" ???
Perhaps the managers of the company "Vividracing" ponimyut my letter is not to bad English and could not give me the right answer.
I am grateful to all those who tell me their opinion.
Thank you very much for your attention to my concerns.
Regards, Vadim.
buena@mail.ru
#3
Driver
Thread Starter
SC300max - hello.
Thank you for the feedback on my theme.
Now, I am sure these "Rear brake disc Left and Right (Cod - R.44105.1C and Cod - R.44105.2C) Drilled & Slotted a company "Rotorа" - correspond OE (original equipment) rotor's dimensions and are fully compatible with its hubs, stock calipers and wheels at 17 "!
You say - Nice brake pads!
Now that the entire set of brake WebBuilder with Rear brake disc Drilled & Slotted company "Rotor" but will also excellent.
When do I get these rotors, I Say - Cheese!
Thank you for your attention to my concerns.
Regards, Vadim.
Thank you for the feedback on my theme.
Now, I am sure these "Rear brake disc Left and Right (Cod - R.44105.1C and Cod - R.44105.2C) Drilled & Slotted a company "Rotorа" - correspond OE (original equipment) rotor's dimensions and are fully compatible with its hubs, stock calipers and wheels at 17 "!
You say - Nice brake pads!
Now that the entire set of brake WebBuilder with Rear brake disc Drilled & Slotted company "Rotor" but will also excellent.
When do I get these rotors, I Say - Cheese!
Thank you for your attention to my concerns.
Regards, Vadim.
Thread
Thread Starter
Forum
Replies
Last Post
Vadim
Suspension and Brakes
0
10-05-07 08:45 AM
SpdRcr0
2Gen GS430 / 400/ 300 Classifieds (98-05)
6
11-11-02 05:03 AM