Air suspension installed! New Stance!
06-22-08, 08:19 PM
#92
Rookie
Join Date: Nov 2004
Location: Texas
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
UAS on CS v.2
Generally speaking you to get the really low drop take the OEM spring plate, cut off the bump stop cup in the front and it will drop down very good. For the rear, you can trim up the lip on the cone section on the Oem rear mount to get the lower drop.
The main advantage to the coilover setup is that you can tune in what you like for your suspension ride.
We are working on doing a solid one-peice rear bracket kit but, it hasn't been done yet.
Generally speaking you to get the really low drop take the OEM spring plate, cut off the bump stop cup in the front and it will drop down very good. For the rear, you can trim up the lip on the cone section on the Oem rear mount to get the lower drop.
The main advantage to the coilover setup is that you can tune in what you like for your suspension ride.
We are working on doing a solid one-peice rear bracket kit but, it hasn't been done yet.
06-22-08, 08:28 PM
#93
Lexus Champion
iTrader: (6)
Join Date: Nov 2002
Location: Mississauga,Ontario,Canada
Posts: 3,488
Likes: 0
Received 8 Likes
on
8 Posts
I have the easy street controller also and it works nice.
You can buy just the controller then wire your own set up to valves or have a full setup with the aluminum valve manifold which is a very nice system .
Mine shows all 4 corners pressures and the tank pressure , and car voltage on the screen . I added silencers which slow down the rate of drop and make it quiet . Do NOT add these they will allow WATER to stay in the lines and not purge out (I live in Canada with winter, get the point) .
Always add a water trap and purge once a week.
Easy street is making a new controller which is wireless also.
There is another company making a very interesting set up which has height adjuster so it is always the right height and level no matter how much weight is in the car.
Good luck.
You can buy just the controller then wire your own set up to valves or have a full setup with the aluminum valve manifold which is a very nice system .
Mine shows all 4 corners pressures and the tank pressure , and car voltage on the screen . I added silencers which slow down the rate of drop and make it quiet . Do NOT add these they will allow WATER to stay in the lines and not purge out (I live in Canada with winter, get the point) .
Always add a water trap and purge once a week.
Easy street is making a new controller which is wireless also.
There is another company making a very interesting set up which has height adjuster so it is always the right height and level no matter how much weight is in the car.
Good luck.
06-25-08, 10:01 PM
#95
Lexus Champion
iTrader: (6)
Join Date: Nov 2002
Location: Mississauga,Ontario,Canada
Posts: 3,488
Likes: 0
Received 8 Likes
on
8 Posts
What car , what do you want it to do for your car ,look low or drive nice.
Who is installing it ?
Minimum is about $3000 and up to $7000 with all sorts of crazy add ons.
Who is installing it ?
Minimum is about $3000 and up to $7000 with all sorts of crazy add ons.
LOL 
Thread
Thread Starter
Forum
Replies
Last Post
2nd, air, controller, diego, easy, generation, gs300, install, installed, lexus, san, stance, street, suspension, universal, universial
