IS F front rotors
#33
Lexus Fanatic
iTrader: (7)
oh btw
heres a pic of the ls430 mounted on 13.25 in rotors ..you can see the 1in ring around close to the base of rotor
so it was not a disbelieve post it was simply questioning based on my own exp with retro fitting
so again i stand corrected and again great job they should really look outstanding
heres a pic of the ls430 mounted on 13.25 in rotors ..you can see the 1in ring around close to the base of rotor
so it was not a disbelieve post it was simply questioning based on my own exp with retro fitting
so again i stand corrected and again great job they should really look outstanding
#34
Lexus Champion
iTrader: (2)
to the OP. it looks good. so what is the radius from center to the outside of the caliper? i wonder if i can get my 18x10 enkei's to clear.
#35
Lexus Fanatic
Thread Starter
lets not get into that conversation. he is not a forum vendor thus this type of conversation will get this thread locked and/or deleted. i had this happen to me when i machined my own steel rack bushings and posted on here.
to the OP. it looks good. so what is the radius from center to the outside of the caliper? i wonder if i can get my 18x10 enkei's to clear.
to the OP. it looks good. so what is the radius from center to the outside of the caliper? i wonder if i can get my 18x10 enkei's to clear.
#39
Lexus Fanatic
Thread Starter
Here are some step by step photos
cardboard and it's many uses
here is how the template looks mounted
just to show you how close the mounting ears are to one another. If it wasn't for the extra 1.80in of rotor mass it wouldn't of work.
is a side by side of the rotors
a before shot
and the TADA shots
I hope this will plant a seed in your heads.If any of you who are thinking about do this mod.It's fairly easy
cardboard and it's many uses
here is how the template looks mounted
just to show you how close the mounting ears are to one another. If it wasn't for the extra 1.80in of rotor mass it wouldn't of work.
is a side by side of the rotors
a before shot
and the TADA shots
I hope this will plant a seed in your heads.If any of you who are thinking about do this mod.It's fairly easy
#43
Lexus Fanatic
Thread Starter
[QUOTE=itazura;4014274]those are the mach up brackets like he said. look at the cut out.
Thanks ^^^^ try to test fit the TT brakes yesterday.But we couldn't get the bolts off.Will try again today.Looking at them closely I think they'll work
#45
Lexus Champion
iTrader: (2)
dude you told me that right now with those rotors it is about 8" from center to our edge of the caliper. i went to measure my enkei wheels today and there is absolutely no way in hell that would work. with 19's it would but 19's are retarded for tracking and tires are through the roof compared to 18's...especially for r-compounds.
i think ill have to stick to my current setup and make brake cooling ducts to compensate for smaller rotor.
i think ill have to stick to my current setup and make brake cooling ducts to compensate for smaller rotor.