2GS 300 Rear Brake conversion ???
03-15-09, 01:20 PM
#1
2GS 300 Rear Brake conversion ???
This afternoon I was at my Techs house fixing my TPS when I looked over at his 2003 GS3 and noticed that his rear brakes are highly similar to those of the supra TT rear brakes. SO i asked if they bolted up to the SC and he said that he wasent sure but the TT rears bolt up the GS so I wondered 
If this could be done on my coupe ? has anyone done or attempted the 2 GS rear brakes on an SC ??? I am going to do a test fit next weekend to see whats up, just wanted to see if anyone had any input on this....
If this could be done on my coupe ? has anyone done or attempted the 2 GS rear brakes on an SC ??? I am going to do a test fit next weekend to see whats up, just wanted to see if anyone had any input on this....
03-15-09, 02:12 PM
#2
i had a gs430 caliper at the house. its a dual piston one. not even close to bolting up or fitting. i had the same idea.
i cant see how TT rears bolt right up. the spacing on the mounting bolts is drastically different. the GS also uses a thinner rear rotor. my stock sc300 rear rotor was too thick.
i cant see how TT rears bolt right up. the spacing on the mounting bolts is drastically different. the GS also uses a thinner rear rotor. my stock sc300 rear rotor was too thick.
03-15-09, 03:21 PM
#3
i had a gs430 caliper at the house. its a dual piston one. not even close to bolting up or fitting. i had the same idea.
i cant see how TT rears bolt right up. the spacing on the mounting bolts is drastically different. the GS also uses a thinner rear rotor. my stock sc300 rear rotor was too thick.
i cant see how TT rears bolt right up. the spacing on the mounting bolts is drastically different. the GS also uses a thinner rear rotor. my stock sc300 rear rotor was too thick.
Last edited by YeA 2jZ; 03-15-09 at 03:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
