IS350 calipers on your SC
#18
I agree with the L or one piece, you also need to consider the possibilities of the brackets deforming under heat and "intense driving."
You also gotta factor in hard breaking and wear and tear and what not.
You also gotta factor in hard breaking and wear and tear and what not.
#20
Pole Position
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: tx
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate everyones suggestions and i see how a "L" shaped bracket would really be more advantages. I will definitely be redesigning it ...
but just for the hell of it we went ahead and put the V1.0 brackets on my brothers car for clearence and to see how they would function ... after a couple of days of testing them out they are great!
of course its just been 2 days so i'm not saying that my design is an official winner, thats something that more driving will only tell.
here's a couple of pics for you guys
*please be aware that this is a modification that i did to my car and if you decide to do it to your car you take full responsibility for your own actions*
but just for the hell of it we went ahead and put the V1.0 brackets on my brothers car for clearence and to see how they would function ... after a couple of days of testing them out they are great!
of course its just been 2 days so i'm not saying that my design is an official winner, thats something that more driving will only tell.
here's a couple of pics for you guys
*please be aware that this is a modification that i did to my car and if you decide to do it to your car you take full responsibility for your own actions*
#21
Banned
iTrader: (3)
Join Date: Sep 2008
Location: NA
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
I've actually had metal parts break on me in the past and i definitely agree with everyone else. That "bracket" of yours is bound to break sooner or later. I would NOT trust that on my car.
As for that one guy who said their are way more dangerous cars on the street then the ops sc. I disagree, having breaking systems that might fail is prob the most dangerous thing that can happen.
I predict that bracket will fail and you will end up rear ending a car and possibly causing a pile-up. OR maybe you will use your parking brake and make your car spin. Who knows, either way it wont be pretty. If you dont have insurance get some and make sure its with a good company. Also dont skimp on the coverage because you'll end it.
As for that one guy who said their are way more dangerous cars on the street then the ops sc. I disagree, having breaking systems that might fail is prob the most dangerous thing that can happen.
I predict that bracket will fail and you will end up rear ending a car and possibly causing a pile-up. OR maybe you will use your parking brake and make your car spin. Who knows, either way it wont be pretty. If you dont have insurance get some and make sure its with a good company. Also dont skimp on the coverage because you'll end it.
#22
look, we appreciate everyones concern and critique! REALLY we do... and yea some of you guys may be right... but you might be wrong too
I'm a certified brake safety expert for just breaks, and actually lead tech! I've seen cars come in with missing caliper bolts, missing bracket bolts, you name it!! if it were to snap or break I would definitely know it! I would hear a loud noise as soon as i applied the break, it would scare the **** out of me, and the car would end up coming to a complete stop without harming ANYONE! A customer we had had a bolt break off, she was older than your grandparents! and she was able to come to a complete and safe stop even with her caliper shot through her wheel because it wasnt serviced properly! If it were to happen to me, Im sure i'll be fine and so would anyone standing within 100 yards We're not trying to be a**holes. we do realize safety is an issue, and like my brother said, this isn't the final bracket... we're just seeing how this clears...
Thanks to everyone! ps... i love you ... ALL of YOU!!!
and just in case i die... tell Scarlet i do give a damn!!!
I'm a certified brake safety expert for just breaks, and actually lead tech! I've seen cars come in with missing caliper bolts, missing bracket bolts, you name it!! if it were to snap or break I would definitely know it! I would hear a loud noise as soon as i applied the break, it would scare the **** out of me, and the car would end up coming to a complete stop without harming ANYONE! A customer we had had a bolt break off, she was older than your grandparents! and she was able to come to a complete and safe stop even with her caliper shot through her wheel because it wasnt serviced properly! If it were to happen to me, Im sure i'll be fine and so would anyone standing within 100 yards We're not trying to be a**holes. we do realize safety is an issue, and like my brother said, this isn't the final bracket... we're just seeing how this clears...
Thanks to everyone! ps... i love you ... ALL of YOU!!!
and just in case i die... tell Scarlet i do give a damn!!!
#23
Lexus Fanatic
iTrader: (15)
I like the pics ... those calipers looke pretty big behind the wheels you should do some stoping tests to measure the improvement if any vs. stock and lets us know if you get anymore versions of your brackets i'm really feelin the calipers might be a nice upgrade in the future
#24
Banned
iTrader: (3)
Join Date: Sep 2008
Location: NA
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
I'm a certified brake safety expert for just breaks, and actually lead tech! I've seen cars come in with missing caliper bolts, missing bracket bolts, you name it!! if it were to snap or break I would definitely know it! I would hear a loud noise as soon as i applied the break, it would scare the **** out of me, and the car would end up coming to a complete stop without harming ANYONE! A customer we had had a bolt break off, she was older than your grandparents! and she was able to come to a complete and safe stop even with her caliper shot through her wheel because it wasnt serviced properly! If it were to happen to me, Im sure i'll be fine and so would anyone standing within 100 yards We're not trying to be a**holes. we do realize safety is an issue, and like my brother said, this isn't the final bracket... we're just seeing how this clears...
Thanks to everyone! ps... i love you ... ALL of YOU!!!
and just in case i die... tell Scarlet i do give a damn!!!
Thanks to everyone! ps... i love you ... ALL of YOU!!!
and just in case i die... tell Scarlet i do give a damn!!!
#25
Pole Position
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: tx
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
here is a pic of the pads touching the rotor, as you can see it is all touching ... its just about 1mm higher than stock
Yea 2jz: those are 19" wheels my brother has and these calipers are pretty good sized, the rotor alone is 13" ... you can definitely tell a huge difference is stopping power, they're a lot more responsive and they feel more precise ... we plan on getting a friends SC300 and comparing the stopping distances between the a stock setup and the IS setup
i can only imagine all those people before that have done something no one else has done before, imagine the first guy that went NA-T ... i'm sure there were a bunch of people telling him that he was going to blow up his motor and how big of a liability he had become ... or the first guy that welded his diff ... imagine how many told him that was the most ghetto job ever and that he should save up and do it the right way ...
i know that my idea needs improvement but at least its a starting point ...
Yea 2jz: those are 19" wheels my brother has and these calipers are pretty good sized, the rotor alone is 13" ... you can definitely tell a huge difference is stopping power, they're a lot more responsive and they feel more precise ... we plan on getting a friends SC300 and comparing the stopping distances between the a stock setup and the IS setup
i can only imagine all those people before that have done something no one else has done before, imagine the first guy that went NA-T ... i'm sure there were a bunch of people telling him that he was going to blow up his motor and how big of a liability he had become ... or the first guy that welded his diff ... imagine how many told him that was the most ghetto job ever and that he should save up and do it the right way ...
i know that my idea needs improvement but at least its a starting point ...
#26
Banned
iTrader: (3)
Join Date: Sep 2008
Location: NA
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
i can only imagine all those people before that have done something no one else has done before, imagine the first guy that went NA-T ... i'm sure there were a bunch of people telling him that he was going to blow up his motor and how big of a liability he had become ... or the first guy that welded his diff ... imagine how many told him that was the most ghetto job ever and that he should save up and do it the right way ...
The real question is are you prepared for what happens when it does fail.
#27
Lexus Fanatic
iTrader: (15)
We should all just chill with the "constructive criticism" i mean he obvioulsy knows the risks hes taking with this "upgrade" lets just wait n see if his design improves most of us are only commenting on how ghettofied his upgrade is or how hes "going to kill someone" insted of giving advice on how he prob could make this better (some have) to help keep him from "killing someone" if this does work out its gonna be a good alternative to the supra and LS calipers just my 2 cents........ Hey drft_n_ you should check out LRD thread on the IS-F Rotor upgrade i think he might be able to help you out on improving the 350 caliper braket
Last edited by YeA 2jZ; 03-23-09 at 07:40 AM.
#29
Lexus Fanatic
I feel your pain brother, boy do I feel your pain.I know what your going through 1st hand.Listen guys for lack of a better word lets call these test brackets...Drift I applaud what your doing ...yes it's true Drift and I are not brake nor bracket engineers/fabricators .But I'm sure of this one thing, through our trials and errors it's the CL community which whom will benefit. And truly the only reward is bragging rights at the end of the day..So stick with it. My only advise is to make the bracket in an hour glass shape,they'll be a lot stronger.Take a look at the clearance again closely, on top mounted bolt position.You should try to float the caliber evenly top and bottom thus the hour glass shape.If steel is what your using then try to get a slightly thicker piece.I think billet is the way to go.Because like the examples seen here VVVVVVVVVV you will have to shim the calibers to center them.Don't give up !!! just take a step back and look at it again.lastly, this taken from a funny *** movie YOU CAN DO IT ....lol I hope this helps.. and CL members as a reminder Don't try this a home without parental guidance ........
I forgot to add, calibers looked awesome on there good job
I forgot to add, calibers looked awesome on there good job
Last edited by //LRD; 03-23-09 at 09:14 PM.