Rockero28

iTrader: (8)

Sorry bro... i did not look at the second link until after my reply post. I have one question for you... Are you using the stock 235/45"s>>> That is what I am using. Thanks for the pics. I appreciate that.

Rock

2SAVVY

Sorry Rock.. I just popped the spacers on the GS for the two photos then I put it back on the SC.. However the front is still in a bit too much on the GS.. The ultimate setup if you were to use spacers on the GS would be to use 15mm ones up front and 25mm ones in the rear then the wheels out sit perfect.. Best situation is to order new wheels but like others have said these H&R spacers are well made and you will have no issues..

One more thing.. Get a 4 wheel alignment after you install these especially if you haven't had one in some time..

Hope that helps!

Rockero28

iTrader: (8)

Yes, most deff it helps. I have ordered that exact combo. !15 for the front and 25 for the back. The next thing is the suspension.... I know.. I will be in for a arm and a leg and probably a toe to get his coil over thing. That is the only way (it seems) I will get the look I want. Low nose. Twice the gap in the back than the front.... Any suggestions and prices on what I need????

Thanks,
Rock....

2SAVVY

Give Steve Ganz (SUPRATRD) a call or PM or email and he should be able to source you some coilovers.. Here is his info:

Steve Ganz
CarsonToyota/Lexus Parts
TRD/L-Tuned/TTE/RMM/Brembo
Tom's Racing/L-Sportline/TEIN
gonzo4u@earthlink.net
1-800-908-6968

Just let him know I referred you and he'll help you out with the price..