Sffd103

iTrader: (16)

Do it Juvi!!! They look good and they have blue or purple would look sick with purple lug nuts with your blue paint!

peyman

iTrader: (6)

on my previous car, infiniti g37, i had purchased a bbk that no one had, thought it would be cool to be the only one with it.... big mistake. the bbk was poorly designed, & was really weak. it was a 6 piston, but the pistons were so small, that the oem s sport 4 piston was a better feel because it had two big pistons. i wouldnt take a chance on a high dollar part

juvi22003

iTrader: (2)

I want to but never heard of them before kinda scary, just order another exhaust so would looking to do something in a month or 2, my first though was to do the LS430/460.

Dont know so much about the brake kit is this something that would work for my car see below:

Small 6 pot Big Brake kit (Set of 2)
Caliper finish: Anodized
Caliper color: Light blue
Choose your kit size and type: Front kit 330x32mm
Rotor type: 2 piece semi-floating
Rotor upgrade: Slotted
Pistons: Aluminium T6061
Brake Pads: Street grey pads
Rotor hat color: Light blue
Car Brand: Lexus
Car Model: Is250
Year: 2007

For this setup it would be $1290 shipped.

600rr05

iTrader: (9)

never heard of them..... pretty cheap prices though.

peyman

iTrader: (6)

can I hang with the big boys too?

CCJ22

iTrader: (26)

So who has the biggest rotors? Montgb on his k sports correct?

Those of you with drilled rotors, any signs of cracking?

Sffd103

iTrader: (16)

Yeah it was Montgb. ddquach's 12/6 pot WP Pro also

CCJ22

iTrader: (26)

M, have you noticed your rotora's cracking any? I worry about purchasing drilled rotors due to the horror stories the internet has of them cracking.

Sffd103

iTrader: (16)

no I haven't noticed any problems at all.

Brian@Vossen

Hoovey

CCJ22

iTrader: (26)

Where are you guys purchasing your rotors from?
Aside from the ones in the classifieds that are used.

600rr05

iTrader: (9)

i think the cracking on the drilled rotors is due to track use of hot temp to cold if your not tracking the car you should have no worries... When i was thinking about ordering them i just emailed Rotora direct.

CCJ22

iTrader: (26)

Gents, those of you with brake distribution knowledge... I need to know if I will have issues with the below setup (as far as braking is concerned, not fitment)

REAR: 6 pot Big Brake kit
Choose your kit size and type: Rear kit 380mm (15")x32mm
Rotor type: 2 piece semi-floating
Pistons: Stainless steel
Parking brake system (for rear only): Drum


FRONT: 8 pot Big Brake kit
Choose your kit size and type: Front kit 405mm (16")x36mm
Rotor type: 2 piece semi-floating
Pistons: Stainless steel

Hoovey689

iTrader: (16)

That's crazy big

not to mention heavy. I liked the 355/355 on the Rotora I had or my current 355/345 F-Sports

CCJ22

iTrader: (26)

Crazy is what I was going for though.
I wanted to have the biggest rotors on the 2IS forum. And so, now I will thanks to Sffd answering my question in post 232
Plus I drive an isSlow50 not an ISF. I'm not concerned about weight since the wheels in the front are already 20x10's. Just a looks factor is all.

I'm only concerned if I ordered the correct caliper sizes for brake distribution during those rare panic stops. I want the front to be biased over the rear.