SAGE Front RCA (30mm)+LS400 Calipers+15mm H&R spacer+16" Stock Wheels = NO RUBBING!!!
#18
Master Thread Closer!!
Thread Starter
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
Pete
#20
#21
#22
Lexus Fanatic
iTrader: (182)
http://shopfigs.com/v1/index.php?rou...&product_id=90
#23
Master Thread Closer!!
Thread Starter
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
true, he makes them standard in 17mm and also any size needed
http://shopfigs.com/v1/index.php?rou...&product_id=90
http://shopfigs.com/v1/index.php?rou...&product_id=90
#25
Master Thread Closer!!
Thread Starter
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
NO...I am using the H&R spacers in which I had to remove the stock wheel studs and install the longer studs. If you are running the same wheels as me...then you will need them. Every wheel is different, so do some homework before buying the wrong spacer size.
#26
Intermediate
iTrader: (1)
...even with just 245's. What do you think? 20mm is REAL close to a full inch, that the wheels/tires would be pushed outwards. Not sure if that will rub the fenders or not...
But, THANKS for the info bro.
#27
Master Thread Closer!!
Thread Starter
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
Oh okay... Are the H&R spacers Hub-centric? If not, I'm just gonna buy either 15 or 20mm adapters. That tough thing is, once it's SLAMMED on coilovers, I might have to remove those nice trim pieces on the inside of the front AND rear fenders and roll them to ensure the fenders do NOT rub my tires.
...even with just 245's. What do you think? 20mm is REAL close to a full inch, that the wheels/tires would be pushed outwards. Not sure if that will rub the fenders or not...
But, THANKS for the info bro.
...even with just 245's. What do you think? 20mm is REAL close to a full inch, that the wheels/tires would be pushed outwards. Not sure if that will rub the fenders or not...
But, THANKS for the info bro.
Only you can be the judge on what size you need....we don't know how much spacing you have with your current wheel sizes and offsets.
I suggest you get your coilovers installed....get to the desired height....then shave/roll your fenders. If you want a rear camber kit, get that installed too. Only then will be know what spacer size you need to push your wheels out to get as flush as possible.
Thread
Thread Starter
Forum
Replies
Last Post
jwynn
LS460 / 430 / 400 / 600h Classifieds
0
05-17-16 02:34 PM