millertime

I am making a drag car out of my 94 sc300. So i dont want it to ride real nice (thats what my sc400 is for). I already have the nf210 tanabe springs and tokiko blues on my 400.

The ride is nice but too much roll and flex for the 300's needs. any suggestions.

Thanks

gldndrgn14

iTrader: (6)

get rid of tokico blues first of all. those are pretty much stock replacement with "sportier" valving. go with some supra setup. i wouldnt know what is good for drag other than the hks drag coilovers. but go ask on the supraforums.

millertime

well the sc400 is going to be the daily so its nice with the blues.

the 300 needs the stiff springs

thanks for the advice

kwg

iTrader: (1)

Coilovers?

LexAnt

iTrader: (2)

AFAIK, if you're going for a drag setup, you don't want too stiff of a setup. you want the rear to be soft so that the car will squat and weight transfer to the rear.

turbodremz

iTrader: (18)

cruising/weekend track car= shocks/springs

drag only= coilovers

LEXXIUM

iTrader: (1)

Agreed with turbodremz on this one 100%, because with coilovers you can custom choose your spring rates to set it up as stiff as you want, where many aftermarket springs are short when it comes to true race performance and made for comfort or street.
Just my $.2