Check your ball joints!!! Pics of the carnage.
#31
man that sucks, i was always afraid of this with my GS's..
I've noticed all the GS's that have posted this happen have all been 98-00 I thought i read somewhere that the 01+ newer replacement balljoints are much safer..
Has there ever been a posted incident of this happening to a 01+? just curious i searched awhile back and came up with nothing (not saying it couldn't)
I've noticed all the GS's that have posted this happen have all been 98-00 I thought i read somewhere that the 01+ newer replacement balljoints are much safer..
Has there ever been a posted incident of this happening to a 01+? just curious i searched awhile back and came up with nothing (not saying it couldn't)
Anyone with answer to above question?
I have 2003 GS300... are the 01+ GS's ball joints safe? I only have 87,000 miles though.
#33
Lexus Champion
#34
#36
#38
Driver School Candidate
#40
Driver
Thread Starter
Join Date: Dec 2010
Location: Georgia
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, i had to get mine locally so it cost right at 200 bux. I spent the better part of a day trying to get that 17mm nut off but it would not budge. breaker bar, blowtorch, impact gun, air wrench, wd-40 still no go. So i just put it back together and i'm gonna get it towed on monday. Guy said 80bux a side for labor and 40 for alignment, does that sound legit?
#41
Driver School Candidate
Join Date: Sep 2010
Location: outterspace
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
#43
Lexus Fanatic
iTrader: (182)
sucks that this happened OP but instead of making a new post....(yes im gonna be debbie downer) you should have just posted in here
https://www.clublexus.com/forums/sus...gs-owners.html
https://www.clublexus.com/forums/sus...gs-owners.html
#45
Master Thread Closer!!
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
this morning....driving to work....I noticed some shaking on the steering wheel at around 50 - 60 mph....noticed it again going home today. at 7:30 pm this evening....i decided to install new lower ball joints (luckily i bought them a couple years ago but never had the chance to swap them...until now)....esp after seeing those pics....LOL!!! i finished about 9:30 pm....hopefully no more shaking tomorrow morning.