What size tires? I have same spec coming in basically 18x9 + 30 and 18x10 + 38

 

Hey guys,

I thought i'd contribute:

Previous setup: Tein CS2's w/ Exact RCA's (front)
New setup: Megan EZ's w/ Exact RCA's (front)
Wheels: 19x9.5 on a 225 front, 19x11.5 on a 265 rear

Pics:




I just installed these and so far I love them. The stiffer spring rate over the CS2's is much better if you're planning on driving low. I have the dampening on the stiffest setting right now, and in comparison to the Tein's I'd say the ride is several clicks stiffer. In the pics, I have plenty of room to go lower but that would just be ridiculous.

Also some of you were asking about the stiffness of the EZ's vs the LP's. I originally wanted the LP's, but with the back order the rep told me the EZ's are just as good. They don't get as stiff as the LP's due to the 15 way, but you can always "cheat" by changing the preload.

Let me know if you guys have any questions, i'll be happy to answer them.

Ryan

 

Pics look good, man! What's the offsets on those wheels?

 

Sweet man. What's the spec on ur wheels? I am guessing ur using spacers too?

 

mygs on 19's with EZ Concept One RS-8 19x8.5F 19x9.5R

 

WHEEL*****, any specs on the wheels? i woulda thought that the EZs were a lil soft to be running on those kinda wheels..i would assume from ur small review that they work out just fine then..

 

Here's my 99 gs400 on MEGEN LP with 20'' vertini hennessey 20x10 rear 20x8.5

 

Thanks , nope! I dont get down with spacers..lol
if you buy spacers you didnt buy the right size wheels

 

The wheels are 19x9.5 front and 19x11.5 rear. The previous owner had the wheels re-lipped from 19x8.5 front and 19x10 rear. The offsets were originally +42 and +36.

To answer your question, yes the EZ's are a little soft for running them as low as the car is in the pic. I had to raise it back up about 1/2" so the tires wouldn't rub, and that's with just me in the car. If I'm going to be driving with 3 or more i'm going to need to raise it even more, or do some more fender work to stop it from rubbing (this is the rear only). I haven't messed with the spring pre-load yet, but I don't think I want it any stiffer or its going to lose that "Lexus" ride. For the fronts, my UCA hits the shock tower ocassionally, so I'm hoping to notch the front. Let me know if you have any other questions.

 

ez streets on 17's
thanks to Chris from Team SNS.

 

low nuff richie lol Looks nice

 

are you all the way dropped?

 

Are you guys always on the stiffest settings for daily driving?

 

so what wheels and specs are you running please

 

i messed with my height a little bit again. fixed my rear frame and got my stability bar back on.
going to re-adjust everything again because not exactly happy with it. maybe its my new tires that i dont like tho.
trying to get a 1gs to daily soon hopefully.