SOLID300

iTrader: (7)

So I bought Brand new Springs and Shocks for my Car and like alot of SC's out there I have a common problem with my driver side being too low.

I Bought B&G Springs for my Car. Its supposed to give my Car a 1.5 inch drop all around. I was thinking of putting a different spring for the driver side that only drops it an 1''.

Anyone ever hear about anyone doing something like this? Your thoughts?

GSteg

iTrader: (15)

I wouldn't do it. You can get away with changing the front set or the rear set, but not left and right. L/R balance is more critical than F/R.

PrlSC400

I wouldn't do that . I believe it will mess with the steering . Check the bushings out to s see if theres any deterioration .