ls400 bbk calipers
#1
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
my brake pads r running low so might as well do ls400 bbk. i know where im buying the rotors and pads, but i dont know where to buy the calipers. i know i can get them from advanced or wutever, but im a kind of person that would prefer something i can trust(not saying that theres anything wrong with the advanced auto parts calipers) i just never had to buy them. so my question to u guys is where should i go to buy them and/or wut brand is trustworthy.
#4
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
ok ive been searching for the past 30 minutes. what all is required for the LS400 BBK upgrade? just the calipers and rotors, just the calipers, or what? whenever i see a post they only mention calipers. do i need to get new rotors or can i use the stock LS400 rotors? am i going to need spacers? i have a little over an inch and a half clearance on the stock SC300 brakes with my wheels right now. im going to the junk yard tomorrow so i need to know this stuff.
#5
Driver
iTrader: (2)
Join Date: Sep 2010
Location: AZ
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
*2 front LS calipers
*2 Ls400 96+ Rotors
*stock brake lines will bolt right up
*Need shorter mounting bolts for the calipers since the SC bolts are a little too long (can use the factory LS400 caliper bolts, (4 total), thats what I did when I went to the junk yard)
*Recommend getting new pads
*Will have to trim your dust shield on the SC to accommodate for the larger rotors
*In my case the factory 16s on my SC were nowhere close to clearing these brakes, but I have read that with about 20MM spacers they will work.
*I also had to grind down the LS calipers a little bit to make them fully seat/align with the SC mounting holes.
Hope this helps, that's just what I ran into when I did mine.
*2 Ls400 96+ Rotors
*stock brake lines will bolt right up
*Need shorter mounting bolts for the calipers since the SC bolts are a little too long (can use the factory LS400 caliper bolts, (4 total), thats what I did when I went to the junk yard)
*Recommend getting new pads
*Will have to trim your dust shield on the SC to accommodate for the larger rotors
*In my case the factory 16s on my SC were nowhere close to clearing these brakes, but I have read that with about 20MM spacers they will work.
*I also had to grind down the LS calipers a little bit to make them fully seat/align with the SC mounting holes.
Hope this helps, that's just what I ran into when I did mine.
#6
Lexus Champion
iTrader: (10)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Alot of people have answered all questions about doing this;
https://www.clublexus.com/forums/sus...ls-brakes.html
I'm actually selling mine right now 'cause I need the money;
https://www.clublexus.com/forums/2ge...-calipers.html
https://www.clublexus.com/forums/sus...ls-brakes.html
I'm actually selling mine right now 'cause I need the money;
https://www.clublexus.com/forums/2ge...-calipers.html
Thread
Thread Starter
Forum
Replies
Last Post