Guess what I found out today! - SEMA - SPC Camber Kit
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2011
Location: Utah
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Ok so maybe this is common knowledge but I have been wanting to get some adjustable ball joints to correct the camber on my IS350. I finally ordered the SPC IS300 ones Monday. Today we came to Vegas for the SEMA show and SPC had a booth there. I started talking to the guy about it and he said that they released an adjustable ball joint for the '06 + ISx50's last week. He had one there and it looked pretty solid. They're on the shelf now and the part number is a 67575. Kinda pissed I JUST ordered the other ones but what can ya do?
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Ok so maybe this is common knowledge but I have been wanting to get some adjustable ball joints to correct the camber on my IS350. I finally ordered the SPC IS300 ones Monday. Today we came to Vegas for the SEMA show and SPC had a booth there. I started talking to the guy about it and he said that they released an adjustable ball joint for the '06 + ISx50's last week. He had one there and it looked pretty solid. They're on the shelf now and the part number is a 67575. Kinda pissed I JUST ordered the other ones but what can ya do?
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
Last edited by Sffd103; 11-02-11 at 04:02 PM.
#4
Driver School Candidate
Thread Starter
Join Date: Jun 2011
Location: Utah
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Ya I own a Napa parts store so I won't be buying from orielly's but I bought the other set from autopartsexpress ( I think ) and it was a great price. Hopefully the 2IS will be priced as well as the IS300 ones.
#5
Driver School Candidate
Thread Starter
Join Date: Jun 2011
Location: Utah
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Not sure about the discrepancy on the numbers. That's just what the guy at their booth told me. I'd believe what the website shows tho. Thanks for the updated info.
Trending Topics
#10
Lead Lap
iTrader: (10)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
click here to see the spc front adjustable ball joint for 2nd gen IS
http://www.spcalignment.com/componen...AFrom&to=USATo
http://www.spcalignment.net/instruct...30-INS_WEB.pdf
look a little shorter than the IS300 ball joint,but look solid- can't wait to order and replace mine
http://www.spcalignment.com/componen...AFrom&to=USATo
http://www.spcalignment.net/instruct...30-INS_WEB.pdf
look a little shorter than the IS300 ball joint,but look solid- can't wait to order and replace mine
#11
Lead Lap
iTrader: (10)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
here's the part info-
Lexus Year (From-To) Drive Type Alignment Rear Camber Rear Camber Tool Rear Toe Rear Toe Tool Thrust Front Caster Front Caster Tool Front Camber Front Camber Tool
IS 2006 - 2012 RWD/AWD 4Wheel N/A OEMA N/A 67530 40920
Alignment Footnotes
4Wheel = 4 Wheel Alignment
Thrust = 4 Wheel Thrust Alignment
N/A = No Available Adjuster
OEMA = Original Equipment Manufacturer Adjustment
(1) = CAUTION: Check for caliper to rotor clearance with disc brakes. Use spacer pak 75970 as necessary to keep caliper centered on rotor
(2) = For RWD Vehicles ONLY
(3) = 66010, 66020, 66080, 66085 You will need to measure outer bushing diameter on the most forward arm on the rear suspension
(4) = Check Bolt Length BEFORE Cutting Hole
(5) = Shims
(6) = LH Toe Tool for front toe adjustment, part nos. 55700, 55800
(7) = Bolts (73415 pp 43) are necessary for changes greater than 3/4°
(8) = Recommended for vehicles lowered more than 1.5"
(9) = Will not work on 1988-89 models with welded-in ball joints
(10) = On M3 only, caster will decrease by 2 degrees
(11)= Pinion Angle Adj. Part No. 82370 & 82390
(12)= Limited camber range of + or - 1.0 degree
(13)= Center stock camber and toe adjusters before calculating shim change
(*) = Series P/N, check part description for size
(**) = Thrust Alignment Plate can correct thrust angle and setback, Part Nos. 63020, 63030, 63040 / Check frame angle with Angle Gauge Part No. 64200
Lexus Year (From-To) Drive Type Alignment Rear Camber Rear Camber Tool Rear Toe Rear Toe Tool Thrust Front Caster Front Caster Tool Front Camber Front Camber Tool
IS 2006 - 2012 RWD/AWD 4Wheel N/A OEMA N/A 67530 40920
Alignment Footnotes
4Wheel = 4 Wheel Alignment
Thrust = 4 Wheel Thrust Alignment
N/A = No Available Adjuster
OEMA = Original Equipment Manufacturer Adjustment
(1) = CAUTION: Check for caliper to rotor clearance with disc brakes. Use spacer pak 75970 as necessary to keep caliper centered on rotor
(2) = For RWD Vehicles ONLY
(3) = 66010, 66020, 66080, 66085 You will need to measure outer bushing diameter on the most forward arm on the rear suspension
(4) = Check Bolt Length BEFORE Cutting Hole
(5) = Shims
(6) = LH Toe Tool for front toe adjustment, part nos. 55700, 55800
(7) = Bolts (73415 pp 43) are necessary for changes greater than 3/4°
(8) = Recommended for vehicles lowered more than 1.5"
(9) = Will not work on 1988-89 models with welded-in ball joints
(10) = On M3 only, caster will decrease by 2 degrees
(11)= Pinion Angle Adj. Part No. 82370 & 82390
(12)= Limited camber range of + or - 1.0 degree
(13)= Center stock camber and toe adjusters before calculating shim change
(*) = Series P/N, check part description for size
(**) = Thrust Alignment Plate can correct thrust angle and setback, Part Nos. 63020, 63030, 63040 / Check frame angle with Angle Gauge Part No. 64200
#13
Lexus Fanatic