wheel shaking
#1
Pole Position
Thread Starter
Join Date: Apr 2011
Location: ca
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
wheel shaking
so after my accident my driver side tire is shaking around 75mph ...im thinking because they didnt balance the new tire right? also those mother suckers...STRIPPED MY STUDS...
can i get some help maybe some insight its really irritating when driving
can i get some help maybe some insight its really irritating when driving
#3
Pole Position
Thread Starter
Join Date: Apr 2011
Location: ca
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
i really hope its not a bent tire shouldnt be ...man this car is a money pit
#6
Pole Position
Thread Starter
Join Date: Apr 2011
Location: ca
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
so turns out it was 2 stripped studs and the balance was off he said the rim wasnt bent as well. Guys its still shaking? im losing patience lol i cant go over 75mph
#7
Driver School Candidate
Join Date: Mar 2011
Location: OR
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
A few other ideas: The most obvious to me would be the car needs an alignment. Next, I'm assuming your tires are not worn on the inside or out? And finally, I had one vehicle with this problem where the ball joint was shot.
Trending Topics
#10
Pole Position
Thread Starter
Join Date: Apr 2011
Location: ca
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
after accident
idk if you guys remember but i had a hit and run maybe 6 months ago. damage was to the driver side fender and slashed the tire. i had the fender and tire replaced . BUT NOW THERE IS A SHAKING i feel when going around 70-80mph . I had them balanced checked if they were bent and also alignment done twice. i need some help any advice im going crazy and im getting the run around
#12
Pole Position
Thread Starter
Join Date: Apr 2011
Location: ca
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
i have a is350 so not the same tech said it wasnt a bent rim or hub
#13
Pole Position
Thread Starter
Join Date: Apr 2011
Location: ca
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
a little assistance
so the vibration continues with the left driver side wheel
no bent rim
no bent hub
all bushing are good
so i thought it would be a hub centric ring
well no so much
vibrates at 80mph .?
any assistance just to figure it out
no bent rim
no bent hub
all bushing are good
so i thought it would be a hub centric ring
well no so much
vibrates at 80mph .?
any assistance just to figure it out