Rear Camber Kit suggestions?
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2011
Location: CA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Need recommendations on correct "butterflying" at the rear when lowering my sc300. I've gotten the fender rolled and it's on tein coilovers with edfc. I'm really low at the moment and wants to go a little lower but as the way it is now, when driving, my car "fish tail" at high speed.
I had the alignment done from a buddy alignment shop and he said he'll look into a camber kit but couldn't source one out for me. So he then told me to raise the back a little and the butterflying will stop.
He mentioned a brand called SPC but that I think he's more of a Honda guy than Lexus. Anyhow, I'm not sure which camber kits of brand is good and quality as well. Any help will be greatly appreciated so I can start to hunt down the items via online.
Thanks
I had the alignment done from a buddy alignment shop and he said he'll look into a camber kit but couldn't source one out for me. So he then told me to raise the back a little and the butterflying will stop.
He mentioned a brand called SPC but that I think he's more of a Honda guy than Lexus. Anyhow, I'm not sure which camber kits of brand is good and quality as well. Any help will be greatly appreciated so I can start to hunt down the items via online.
Thanks
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
look on ebay for the supra ones by tc sportline.i have both front and back and have ran them for about 3 months with no issues so far
Last edited by Catracho30; 05-27-12 at 10:08 AM.
#6
Driver School Candidate
Thread Starter
Join Date: Dec 2011
Location: CA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I've read a post about a member here using the Supra TC Sportline Camber Kit, but along with that he also used the Supra Lower Control Arm and Tie Rod End as well. I'm not sure if that combination of parts are needed when using the Supra TC Sportline Camber Kits, but I'm not looking to replace my Lower Control Arm or Tie Rod Ends as it works fine.
Also, the member also reported having some other noise issue after installing the Supra TC Sportline Camber Kit with the Supra Lower Control Arm and Tie Rod End. There wasn't an update to that noise problem, the thread is about a year old if I remember correctly.
Here's the thread.
https://www.clublexus.com/forums/sus...e-goodies.html
I do however, need a Camber Kit for the Rear of my SC300 ASAP. Money is not a problem.
Also, the member also reported having some other noise issue after installing the Supra TC Sportline Camber Kit with the Supra Lower Control Arm and Tie Rod End. There wasn't an update to that noise problem, the thread is about a year old if I remember correctly.
Here's the thread.
https://www.clublexus.com/forums/sus...e-goodies.html
I do however, need a Camber Kit for the Rear of my SC300 ASAP. Money is not a problem.
#7
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
how low are you and hows your rear camber looking? I need a kit for the rear too.
Thanks for the link I read up on that and I'm really not looking to replace everything as well.
Thanks for the link I read up on that and I'm really not looking to replace everything as well.
Trending Topics
#10
Driver School Candidate
Thread Starter
Join Date: Dec 2011
Location: CA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
At the time of my alignment when picking up my ride, I took a quick glanced at my alignment specs and the rear was around 3.5 or -3.5. The best correction that my alignment guy could adjust with the stock camber kit was to 2.3 or -2.3. I don't know too much about alignment specs.
Thread
Thread Starter
Forum
Replies
Last Post
BTuck
LS - 3rd Gen (2001-2006)
6
01-14-20 08:23 AM
Trendzero
Suspension and Brakes
1
03-13-12 06:24 PM