ball joints
#16
Pole Position
iTrader: (10)
The SPC for the uppers and how about these for the lower? http://shopfigs.com/v1/index.php?rou...product_id=138
#17
Pole Position
iTrader: (23)
I went in for service today as my steering was a bit off.
Turns out my left lower and upper ball joints need replaced.
They quoted $900 installed. is there an alternative? Could I order my own ball joints somewhere else?
I came across these online:
http://www.iapdirect.com/spc-front-a...250-is350.html
Would these work for both the upper and lower?
Turns out my left lower and upper ball joints need replaced.
They quoted $900 installed. is there an alternative? Could I order my own ball joints somewhere else?
I came across these online:
http://www.iapdirect.com/spc-front-a...250-is350.html
Would these work for both the upper and lower?
Also it looks like someone on eBay is selling both assembly's for the passenger and driver side.
http://www.ebay.com/itm/LEXUS-IS250-...6510a1&vxp=mtr
#19
Pole Position
iTrader: (23)
https://www.clublexus.com/forums/is-...ird-noise.html
https://www.clublexus.com/forums/sus...placement.html
#21
Driver
Thread Starter
Join Date: Jun 2012
Location: Ontario
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Taking it in for a second look with a local shop. I'll get them to show me everything now that i know what to look for. The eBay link looks good for the Lower Ball Joints, so thanks for that. I'll just need to determine if I need the upper as well and where to get them.
#23
Driver
Thread Starter
Join Date: Jun 2012
Location: Ontario
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Wow so I took it in for a second look at my local garage. Checked all ball joints both sides, and.... Nothing!!! They are fine. Mech at dealer must have made some BS up about it being the ball joints! All I needed was alignment! This is a dealership that I know the parts manager at, so I usually get hooked up and taken care of nicely. Must have got a new mechanic who doesn't normally touch my car? Either way, glad I didn't jump the gun on ordering parts. Thanks all for the posts, mi sure they'll be useful down the road. Guess my money can be spent on something else
Thread
Thread Starter
Forum
Replies
Last Post
OMAHA
LS - 1st and 2nd Gen (1990-2000)
11
12-19-14 12:45 AM