6SICK6:Painting my IS350 Calipers
#1
6SICK6:Painting my IS350 Calipers
So heres how they looked before i started
Stock 4 piston calipers
baby little one piston in the rear
Calipers all set, ready to paint
First get some etch primer on em
All primered up
Im doing gloss black calipers with the word LEXUS in gold. Im spraying the gold i want first and laying the LEXUS sticker over it and black around it.
Stock 4 piston calipers
baby little one piston in the rear
Calipers all set, ready to paint
First get some etch primer on em
All primered up
Im doing gloss black calipers with the word LEXUS in gold. Im spraying the gold i want first and laying the LEXUS sticker over it and black around it.
#5
Moderator
iTrader: (10)
Not wrong..right! They should be looking like this...
...and this discussion about the internal rotor veins to top it off from PowerSlot themselves :
https://www.clublexus.com/forums/sus...nt-rotors.html
...and this discussion about the internal rotor veins to top it off from PowerSlot themselves :
https://www.clublexus.com/forums/sus...nt-rotors.html
#7
Thanks guys
Yea I've been googling a lot since u mentioned they might be backwards and I've been getting mixed answers a lot. I saw a thread on here asking the same question of which way do they go and they seemed to have the same ebc rotors and found the way I have them are correct. So I'm hona have to get a hold of ebc themselves and talk to em. Thanks for the concern tho guys!
Yea I've been googling a lot since u mentioned they might be backwards and I've been getting mixed answers a lot. I saw a thread on here asking the same question of which way do they go and they seemed to have the same ebc rotors and found the way I have them are correct. So I'm hona have to get a hold of ebc themselves and talk to em. Thanks for the concern tho guys!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
DiezDos
GS - 4th Gen (2013-2020)
8
01-24-17 02:58 PM