View Poll Results: Need a camber kit for your GS?
Yes, I really need one!!
351
81.82%
No, I dont plan on lowering my car.
13
3.03%
No, I like eating the inside of my tires in 15K - 20K miles.
26
6.06%
What's a camber kit?
39
9.09%
Voters: 429. You may not vote on this poll
Need a Camber Kit for your GS?
#226
Lexus Champion
iTrader: (2)
Join Date: Jun 2005
Location: Vancouver BC Canada
Posts: 2,174
Likes: 0
Received 0 Likes
on
0 Posts
i had actually contacted the seller and this was the response back:
and k-mac is an aussie product: http://www.k-mac.com.au/
and k-mac is an aussie product: http://www.k-mac.com.au/
i'm still asking them questions about this product... apparently these replace the bushings in the LOWER rear control arms, where they bolt up to the subframe. i was under the misunderstanding that it replaced the oem camber bolts/bushings in the UPPER control arms.
so these would basically either push or pull the bottom of your wheels/tires, instead of the top.
will this mean my track will be shortened if i try to gain positive camber?
#229
Lexus Test Driver
It's a shortened factory arm, sorry I don't know where my camera is, it's been missing since I went on a trip earlier this month
Just picture a factory arm, but slightly shorter
So now we have something available, please PM to order. Any questions should be answered if you search this thread, as this topic has been beaten like a dead horse
Just picture a factory arm, but slightly shorter
So now we have something available, please PM to order. Any questions should be answered if you search this thread, as this topic has been beaten like a dead horse
#232
Lexus Champion
iTrader: (2)
Join Date: Jun 2005
Location: Vancouver BC Canada
Posts: 2,174
Likes: 0
Received 0 Likes
on
0 Posts
so basically, does it make the track narrower in the rear end? oh man my stock offsets are so deep as it is
really need pics! my mechanic is worried that it might be a scary hack job like another set he's seen from elsewhere
really need pics! my mechanic is worried that it might be a scary hack job like another set he's seen from elsewhere
#234
It's a shortened factory arm, sorry I don't know where my camera is, it's been missing since I went on a trip earlier this month
Just picture a factory arm, but slightly shorter
So now we have something available, please PM to order. Any questions should be answered if you search this thread, as this topic has been beaten like a dead horse
Just picture a factory arm, but slightly shorter
So now we have something available, please PM to order. Any questions should be answered if you search this thread, as this topic has been beaten like a dead horse
Got anything for the front end? Have you heard if anyone is making something for the front end? Need to add camber adjustability to bring back to OEM spec.
Thanks,
DJC
#237
Lexus Champion
iTrader: (2)
here are the pics of the arms installed on my car, you can see that where there would be bushings on the stock arms, there aren't any on the ikeyas.
https://www.clublexus.com/forums/sho...d.php?t=306221
#238
#239
Lexus Champion
iTrader: (2)
Join Date: Jun 2005
Location: Vancouver BC Canada
Posts: 2,174
Likes: 0
Received 0 Likes
on
0 Posts
correct, the ikeyas have no bushings whatsoever.
here are the pics of the arms installed on my car, you can see that where there would be bushings on the stock arms, there aren't any on the ikeyas.
https://www.clublexus.com/forums/sho...d.php?t=306221
here are the pics of the arms installed on my car, you can see that where there would be bushings on the stock arms, there aren't any on the ikeyas.
https://www.clublexus.com/forums/sho...d.php?t=306221
i tried contacting carson awhile back regarding these, but the person who answered my email said they never heard of the brand... what am i missing?
also, what is the road isolation like when compared to stock? i noticed you were comparing to daizen, but in the gs section i read a lot of complaints about daizen being noisy and harsh.
#240
Lexus Champion
iTrader: (2)
thank you for posting your thread!
i tried contacting carson awhile back regarding these, but the person who answered my email said they never heard of the brand... what am i missing?
also, what is the road isolation like when compared to stock? i noticed you were comparing to daizen, but in the gs section i read a lot of complaints about daizen being noisy and harsh.
i tried contacting carson awhile back regarding these, but the person who answered my email said they never heard of the brand... what am i missing?
also, what is the road isolation like when compared to stock? i noticed you were comparing to daizen, but in the gs section i read a lot of complaints about daizen being noisy and harsh.