swegs430

400 used? or were?

Blanco

iTrader: (8)

$400 for the front was for new arms. Only the rears were used.

swegs430

were did u get them? the ones on theire page is 733$

Blanco

iTrader: (8)

Search is your friend!! This place has the cheapest price I've seen, cheaper than when I got mine Best Price. Lightning Motorsports has a video of the install, if you're the DIY type. This is who I bought from, but looks like their prices have gone up slightly. Install vid

swegs430

thanx sir

Philthy29

Good deal, spc is sold out of orielys, wonder if they can get them. Thanks for the help sir, and all of you that have tried this method, post up your experience so we know how well they work/last!

AlsRisto98

ALBERT RIVERA lafiebre240@yahoo.com

We definately need a camber kit.

scriber

iTrader: (2)

It looks like the kit is on sale for 302.44 with +/- 2 degrees of camber adjustment. Seems like a good deal. Would this be enough camber to adjust a car that's dropped approx 2" on 19"?

scriber

iTrader: (2)

Does anyone have any experience with these adjustable camber arms from UltraRev? http://www.ultrarev.com/72270-spc.html
My alignment place says +/-2 degrees is plenty to work with but im just wondering if these arms are junk or what??

adamgamz

I just put this on order for my car, my camber is negative and my inner portion of my tires are wearing early, I have already done new Daizen bushings, inner tie rods, and alignment, it still wears the inner portion of the front tires. I have a good hookup on these, if anyone needs them let me know, I can get them for a little over $350 for the set.

http://www.lightningmotorsports.com/.../i-396364.aspx

21SF

iTrader: (1)

too bad SPC's UCA dont actually look like that, dont have an angle pillow mount, and wear out super fast, Tehre are several vendors in the market place with these.

Now if you not very low and dont risk hitting the shock tower then these should get you camber in check for how ever long they last.

adamgamz

Yea I'm not very low, maybe 1.5" - 2" I can't remember what the springs and KYB's did, I'm not into the hella flush look, I am more interested in 1/4 mile times.

21SF

iTrader: (1)

you cant get your camber into spec with the minimal drop? hmm..

adamgamz

Nope, I think I have a 1.5 or 2" drop. The adjustment is maxed out and like I said I replaced everything else already.

21SF

iTrader: (1)

whats your camber at ? should NOT be eating tires at 1.5-2 negative...maybe check your toe...