Suspension torgue specs
#1
Intermediate
Thread Starter
![Talking](https://www.clublexus.com/forums/images/icons/icon10.gif)
i recently endeavored to change the struts and ran into seized bolts which had to be chopped out. i have 5 different arms i want to torque properly. could someone help me with that? ive also read and been told one of these bolts deals with the camber alignment? thanks guys
#2
Lexus Test Driver
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Look in the Sticky at the top... Suspension Torque Specs....
And follow the instructions about loading the suspension or it will damage your new parts.
Basically any bushing made of rubber can only be fully tightened when at ride height. Do NOT torque to spec while arms are hanging down!!!
And follow the instructions about loading the suspension or it will damage your new parts.
Basically any bushing made of rubber can only be fully tightened when at ride height. Do NOT torque to spec while arms are hanging down!!!
The following users liked this post:
bryceis250 (07-06-19)
#3
Intermediate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
fell really stupid i didnt see that. thank you for your time its appreciated!
#4
Intermediate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
could you refresh me please i forget which number im looking for , whats the 3 numbers again 3 units of measurement i think...
The following users liked this post:
bryceis250 (07-07-19)
#6
Intermediate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
on the spec charts provided there are 3 numbers..the last number is the foot pounds. got it! thanks alot man
Thread
Thread Starter
Forum
Replies
Last Post
OMGTSX
Northeast
14
07-18-10 09:37 PM