Urgent
#1
Urgent
So unfortunately being the hard headed person my spouse is, i need help replacing/finding a new wiring (chassis) harness asap! this sc400 being his only car as of now, he NEEDS it up and running. He was able to install new coilovers but not being too familiar with the wiring and his car being too low on the first run, he burnt the wheel well which exposed the wires. I inspected it and saw no damage to the wires and we separated them enough to wrap each individual wire so no copper is exposed and touching one another. We both weren’t thinking at the time leaving the driveway to test the coils and understand the shame we deserve but really really need help. (the car will not start)
very sad but well deserved.
very sad but well deserved.
#2
This is pretty standard. There are a bunch of threads showing you how to relocate that harness. You'll need to resolder the wires that were chewed through as well. Here is one of the DIY threads out there. Just look up "SC wire harness relocation" in google if you need more info. You likely blew some fuses also on the initial short so check the relay box in the driver foot well.
https://www.clublexus.com/forums/per...elocation.html
P.S. I just finished rerouting mine to avoid the same fate and it was a PHENOMENAL pain in the ***
https://www.clublexus.com/forums/per...elocation.html
P.S. I just finished rerouting mine to avoid the same fate and it was a PHENOMENAL pain in the ***
Last edited by - V -; 02-14-22 at 04:55 PM.
The following users liked this post:
cg1128 (02-14-22)
Thread
Thread Starter
Forum
Replies
Last Post
SBMGS4
Northern California Lexus Club
8
09-26-12 12:32 PM
RumpRoast
Lexus Audio, Video, Security & Electronics
1
09-20-09 03:48 PM