When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I been thinking about painting my 2022 IS350 F Sport calipers. I have Ultrasonic Blue Mica 2.0 paint. What colors calipers do you guys think will match the paint?
I been thinking about painting my 2022 IS350 F Sport calipers. I have Ultrasonic Blue Mica 2.0 paint. What colors calipers do you guys think will match the paint?
Orange..closest I could get to the Factory GSF color.
No I used VHT Flame Proof flat Orange rattle can with there high temp clear.
Hey, your calipers look great!
I found your post and i was looking to buy some red VHT Rattle Can and paint mine.
How is it holding after few months? Is it chipping/fading?
Did you use any primer before / clear coat after? Or just paint?
I found your post and i was looking to buy some red VHT Rattle Can and paint mine.
How is it holding after few months? Is it chipping/fading?
Did you use any primer before / clear coat after? Or just paint?
Thanks in advance!
Its holding up good, no chipping just a little fading..no as shinny as when I applied the clear coat. I did no use any primer before just cleaned then up with CRC brake clean..just make sure they are completely dry before you start the process.
Its holding up good, no chipping just a little fading..no as shinny as when I applied the clear coat. I did no use any primer before just cleaned then up with CRC brake clean..just make sure they are completely dry before you start the process.
thank you! As long as there is no chipping i’ll be happy, I expect some fading with the time due to brake dust and weather etc.
i mean can’t complain for the price of couple rattle cans vs 250$+ for powdercoating 😅
"switch them out"? No, I would not recommend doing that, or if it is even possible.
I would say painting them black to match the fronts is a good idea.
Agreed, no need to "switch them out." The OEM brakes on the IS350 i'd say are more than enough. Also the EPB would be an issue. Only reason I would "upgrade" them is because of power i.e. IS500 or forced induction