Camber Kit R&D:Revenge Motorsports (ElCajon,Ca)
#76
Lexus Fanatic
I think if I had perfect camber on the rear of my car I wonder if I would rub again. I filed the 2 rear fenders down and have the perfect clearance. It would be cool to get max tire wear. I had a kit on my G35 but in the end it was actually designed for added camber over what the stock set up would allow.
#85
Lexus Fanatic
iTrader: (33)
guys & gals Figgs has all these parts I sent our front upper arms and the rears are the same as the ISx50.
Check out his threads to see the quality!
hes also a vendor on CL
http://www.figsengineering.com/index.html
Check out his threads to see the quality!
hes also a vendor on CL
http://www.figsengineering.com/index.html
Last edited by passnu2; 01-15-11 at 04:37 PM.
#87
The Maker
iTrader: (11)
I have a "camber kit" released for the rear for the past 4 months.
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
#90
Intermediate
iTrader: (16)
I'm running Megan rear camber kit, upper and lower traction arm, toe arm and camber arms. Had I known about Figs engineering before I got mine, I would have gone with that, as a friend of my has it and the engineering and Craftsmanship is top notch.
For the front, I'm running SPC front camber fitted for an IS300. Some members said that it requires sanding down the upper control arms. I didn't sand or grind anything. I'm AWD. Hope this helps.
For the front, I'm running SPC front camber fitted for an IS300. Some members said that it requires sanding down the upper control arms. I didn't sand or grind anything. I'm AWD. Hope this helps.