johnnunez2

i want to drop it but i dont want it to look like a riced out long civic.lol. plus i dont want to kill my tires every few months! please lmk. or if theres any tricks. i read somewhere something about the is350 . im not sure. please explain,thanks

rominl

iTrader: (4)

specifically for 3gs, no, nothing. some people tried 2is parts on 3gs

JasGS350

iTrader: (7)

There are camber kits specifically made for the rear of our cars. Figs makes some great products. I personally have the Figs rear mega arms and toe links and in front I have the IS 250/350 Ball joint kit. I have BC coilovers and I'm tucking all 4 corners and my alignment is within factory spec. My 2 cents, hope it helps.

Mike1970

iTrader: (1)

ok where can i get all that stuff? and was it hard to install? you tucking tire or rim 20's or 19's? thank you. pic please

myGSsoWET

iTrader: (3)

Do you know if it will also work for AWD?

johnnunez2

jasgs350 if its not too much to ask, can you post me the link to these items? idk anything about that company, never heard of it. link to the front and rear. is it expensive?????????? $$$$$$$$$$$$$$$$$$$.

IXI187IXI

iTrader: (3)

nothing a good alignment cant fix

designo

iTrader: (6)

If you are not dropping your car that low, you don't need to worry about camber! Honestly, it's only a major issue with those who have slammed their GS's to the concrete!

IXI187IXI

iTrader: (3)

heres how my car sits now and i have no issues

JasGS350

iTrader: (7)

You can get the control arms and toe links from Figs, http://www.figsengineering.com/suspension.htm
CL vendor.

I got the front ball joint kit from CircuitMS, www.circuitmotorsports.net
CL vendor as well.


I'm tucking tire on 20's. I'm going to do a photo shoot soon. Here is one pic.

http://flic.kr/p/9Vx8ji

JasGS350

iTrader: (7)

I posted this information in the previous post. It cost me about 900.00 for all the camber correction hardware. But, it was well worth it when you are rolling on Pirelli PZero Nero's. Not the cheapest tires

tungo

iTrader: (16)

I have all 4 Megan rear Megan arms made for the IS250/350 on my AWD GS350 and they work just fine.

I need a camber kit for the front, but have no idea if the SPC ball joint for the IS300 will fit for the AWD GS350. The ball joint has to be pressed into the upper control arm. Can anybody confirm?

Kcook700

iTrader: (2)

Tungo,

Somebody with an ISx50 did it here. The front suspension is the same for 3GS.

Kris

tungo

iTrader: (16)

That was on a RWD GS. The front suspension is different, which is why I'm not sure if it will work for AWD. The RWD front struts are conventional struts whereas the AWD is a fork type design. I will buy this SPC part immediately if its confirmed it will fit.

Kcook700

iTrader: (2)

^ the upper control arms are the same part number.