Installed RCA blocks on my AWD GS
#1
Installed RCA blocks on my AWD GS
I installed 20mm blocks on my GS this morning. followed Pete's instructions that came with the blocks (thanks pete!) i'm EXTREMELY happy with the result! the front wheels look just a tad lower than the rears but it looks great to me. very easy to install. and i'm glad i got the 20mm. there's only a few mm of space between the inside of the wheel and the bottom of the hex bolt so running any wheels smaller than 17" is impossible.
the best part...NO WOBBLING i don't know if this will be the case with every AWD owner. i chose to go with the 20mm blocks to possibly minimize the wobbling if there was going to be any. anyhow, the ride is still lexus smoooooooooth
i took a few pics of the wheel height before installing and what the blocks look like installed. it started raining after i took it for a test drive so i'll have pictures of the car as a whole posted tomorrow.
the best part...NO WOBBLING i don't know if this will be the case with every AWD owner. i chose to go with the 20mm blocks to possibly minimize the wobbling if there was going to be any. anyhow, the ride is still lexus smoooooooooth
i took a few pics of the wheel height before installing and what the blocks look like installed. it started raining after i took it for a test drive so i'll have pictures of the car as a whole posted tomorrow.
Last edited by gridlock13; 07-08-11 at 05:02 PM.
Trending Topics
#9
I would be interested in these as well. I have been considering f-sport springs to lower.
Can anyone explain the engineering premise and or any concerns with this approach. I only asked because my car is a daily driver and I average over 400 miles per week. I don't want to do anything that would screw up the suspension or possible the front drive system.
Can anyone explain the engineering premise and or any concerns with this approach. I only asked because my car is a daily driver and I average over 400 miles per week. I don't want to do anything that would screw up the suspension or possible the front drive system.
#10
montz450,
i bought them from PHML. give him a PM.
PeteinPA,
in a nutshell, it raises the front suspension parts which are connected to the brake rotors and front axles, thus lowering the car. since the suspension parts are raise, it brings the wheel up closer to the top of the wheel well. i know one plus to using the blocks is that the strut isn't compressed since you aren't changing the springs. the strut and spring sits on the lower ball joint which doesn't change it's position so you retain the same ride comfort. the only concerns i'd have are the normal wear on the inside of the tire just like you'd get with coilovers or lowering springs. and if you hit a bump head on with enough force, the bolt or block my break. but in that case you'd have messed up your suspension regardless of if you had the blocks or not.
hope this helps. anyone who has more knowledge should feel free to chime in!
i bought them from PHML. give him a PM.
PeteinPA,
in a nutshell, it raises the front suspension parts which are connected to the brake rotors and front axles, thus lowering the car. since the suspension parts are raise, it brings the wheel up closer to the top of the wheel well. i know one plus to using the blocks is that the strut isn't compressed since you aren't changing the springs. the strut and spring sits on the lower ball joint which doesn't change it's position so you retain the same ride comfort. the only concerns i'd have are the normal wear on the inside of the tire just like you'd get with coilovers or lowering springs. and if you hit a bump head on with enough force, the bolt or block my break. but in that case you'd have messed up your suspension regardless of if you had the blocks or not.
hope this helps. anyone who has more knowledge should feel free to chime in!
The following users liked this post:
ballin (04-04-21)
#11
Master Thread Closer!!
iTrader: (33)
Joined: Jul 2002
Posts: 9,859
Likes: 9
From: Waipahu, Waikele, HI
You were the trailblazer...first to install them.
Pm greyhndfan...he's been running them since august 2010 as a daily driver.
Great explanation...but they won't break. Just chk the torque on the bolts every few months...use locktite if you have them. I've never had a problem with loosened bolts if torqued properly.
I would be interested in these as well. I have been considering f-sport springs to lower.
Can anyone explain the engineering premise and or any concerns with this approach. I only asked because my car is a daily driver and I average over 400 miles per week. I don't want to do anything that would screw up the suspension or possible the front drive system.
Can anyone explain the engineering premise and or any concerns with this approach. I only asked because my car is a daily driver and I average over 400 miles per week. I don't want to do anything that would screw up the suspension or possible the front drive system.
montz450,
i bought them from PHML. give him a PM.
PeteinPA,
in a nutshell, it raises the front suspension parts which are connected to the brake rotors and front axles, thus lowering the car. since the suspension parts are raise, it brings the wheel up closer to the top of the wheel well. i know one plus to using the blocks is that the strut isn't compressed since you aren't changing the springs. the strut and spring sits on the lower ball joint which doesn't change it's position so you retain the same ride comfort. the only concerns i'd have are the normal wear on the inside of the tire just like you'd get with coilovers or lowering springs. and if you hit a bump head on with enough force, the bolt or block my break. but in that case you'd have messed up your suspension regardless of if you had the blocks or not.
hope this helps. anyone who has more knowledge should feel free to chime in!
i bought them from PHML. give him a PM.
PeteinPA,
in a nutshell, it raises the front suspension parts which are connected to the brake rotors and front axles, thus lowering the car. since the suspension parts are raise, it brings the wheel up closer to the top of the wheel well. i know one plus to using the blocks is that the strut isn't compressed since you aren't changing the springs. the strut and spring sits on the lower ball joint which doesn't change it's position so you retain the same ride comfort. the only concerns i'd have are the normal wear on the inside of the tire just like you'd get with coilovers or lowering springs. and if you hit a bump head on with enough force, the bolt or block my break. but in that case you'd have messed up your suspension regardless of if you had the blocks or not.
hope this helps. anyone who has more knowledge should feel free to chime in!
The following users liked this post:
taters (02-28-21)
#15