Ohlins coilover
#1
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
#5
#6
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
looks very similar to the DG-5 I've had for over a month now. One shop tried to charge me a grand to install them(second quote ran to 6 hundred quickly; with the excuse that it's a new car). Maybe they thought I fell off the wagon and hit my head, but I told them thanks but no thanks. I didn't have the tools at the time so I've ordered the tools. I got mine from Japan through a friend and the only warning he gave to me was that the rear is a pain in the you know what if you try to do it by yourself. I saved some coin compared to the price of the Ohlins. An alignement for staggered 20's will be my next headache whenever I get it done.
Last edited by JayRo354; 09-06-12 at 05:28 AM. Reason: wrong model entered initially
Trending Topics
#8
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
It's nothing too major other than the removal angle to the rear is tricky and a little extra support will be a good idea. Installation is easier than removal as always. I didn't have any tools for the job period, so I had to get everything from scratch, not any particular special tool. A handyman tool kit would not have helped me to get the job done so I just ordered some upgraded tools suited for the job. I'm a weekend wrencher mostly, but most pro installers should aready have everything on hand. I figured I'd save the coin and do it myself this time.
Last edited by JayRo354; 09-06-12 at 10:55 PM. Reason: add pic
#11
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Im guessing its around 3+, but could be wrong . When i had my SC i paid 3 but it retail for 46.
JayRo those are Fortuner-DG right? Are they for the 4GS? The bottom rear knuckle doesn't look right. It looks like it will touch the axles. shouldn't it get thinner in the end?
JayRo those are Fortuner-DG right? Are they for the 4GS? The bottom rear knuckle doesn't look right. It looks like it will touch the axles. shouldn't it get thinner in the end?
#12
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Im guessing its around 3+, but could be wrong . When i had my SC i paid 3 but it retail for 46.
JayRo those are Fortuner-DG right? Are they for the 4GS? The bottom rear knuckle doesn't look right. It looks like it will touch the axles. shouldn't it get thinner in the end?
JayRo those are Fortuner-DG right? Are they for the 4GS? The bottom rear knuckle doesn't look right. It looks like it will touch the axles. shouldn't it get thinner in the end?
Last edited by JayRo354; 09-11-12 at 03:39 AM.
#13
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Finally got off my rear and did some wrench time with my DG-5's on my GS 13F-Sport. If anyone gets the Ohlins set up it should look similar after install. I still have room to go lower but I think it's already there. I may change the position of the spring later but for now I wanted to test fit to see how low I could go; and it goes low enough for my tires to eat plastic.
![EEK!](https://www.clublexus.com/forums/images/smilies/eek1.gif)