TX on 24's
#1
Pit Crew
Thread Starter
TX on 24's
Got the 24's on the wifes TX a couple weeks ago and some members asked for pics. Wheels are Status Venti 24x10+35 offset and the tires are Lionheart LH10 in a 295/35/24. Stock side wall on the 22's are 4.52" and I went with the biggest tire I thought i could fit to maximize sidewall height and these work out to 4.09". I went the same with the 22" winters 275/45/22 and on both sets I had to assume all risk of them not fitting because the TX is too new and no rim dealers were able to confirm any non OE sizes. I only got a couple short drives in on the stock 22's before I swapped to winters but compared to my winters which are a 275/45/22 the ride has not suffered at all. It will ride a bit harder compared to the 22's but nothing noticeable, the TX suspension is set up nicely to handle the 22's and 24's. The fronts are flush to the fender and the rears needed a 5mm spacer to get them flush. There is some minor rubbing on the inside corner of the mudflap when the wheel is fully cranked reversing but nothing else thankfully I also added some Lexus wheel caps.
#2
Your #1 Lexus Vendor
iTrader: (8)
Looks good.
-Josh
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#4
Pit Crew
Thread Starter
Thanks! Road noise is not an issue at all, even with the music on low there isnt anything noticeable. Going to a 35 was a bit worrisome but I went with the widest tire I could do maximize the side wall of the 35. The TX suspension is also amazing and handles these no problem.
Thread
Thread Starter
Forum
Replies
Last Post
SickES350
ES - 5th Gen (2007-2012)
28
05-01-10 03:48 PM