dani3l

For sale is Riverside Traffic Star DTS. These are way better than the MAYA DTS because they are forged weighing in at only 22 pounds for super chrome triple plated and a polished lip at around 2 inches.

size : 19x8.0
Offset : +47

Fitment : Lexus GS 300, 400, 430
IS 300
ACuras Rls and TLS
Hondas accord
Nissan Altimas and Maxima.


Their are hardly noticable pebblie nicks on one of the rims. NEVer before have the rims been bent nor curbed rashed!!!

The tires tread left are 90% front and 70% reart.

rims are 9/10 mint conditioned and always hand washed and perfectly balanced. Requires no balance due to the perfect rim.

Company info Is Riverside est in 1980's. Their more affordable rims are Lowenhart, MAYA and Bersagio.

I honestly paid over $4,900 for these rims because they are true three peice rims and are super japanese chrome. I have recently converted to stock and getting ready to buy a Farrari Modena. PLease email me if you have any questions.

RETAILS for over $4,900 brand new
Conditon Like new is $2,250 including free shipping flat rate. If you would like to pick it up deduct $100.

***************************************************************************************

rims were stolen last night from my backyard. PLease remove thread

***************************************************************************************

dani3l

pic 2 sorry for the separate pic

dani3l

pic 3 sorry for the separate pic

dani3l

pic 4 sorry for the separate pic

dani3l

pic 5 sorry for the separate pic

High PSI

iTrader: (1)

VERY nice rims at a very nice price. If that offset would work on my car, I'd pick them up.

(Also, don't mean to be a ****, but it's a FERRARI. People who buy cars I'd give my first born son to own and know nothing about make me want to sacrifice them to the exotic car Gods.)

phatpat

nice wheels...does 19x8 +47 fit with no issues on the gs? does anyone know if they would fit on the '06 model?

what size are the tires?

tmf2004

iTrader: (15)

I think these would look great on my pearl GS... I'm concerned about the offset and how they would fit on my car..any issues etc...my car isn't lowered so I don't know if they would look good? Really nice wheels you got there at a good price...Also, does the front rim/tire stick out beyond the fender? Can't tell in the picture...They are 19x8 in a four coners correct...Thanks Tony

Neo

iTrader: (3)

19x8 +47 is very conservative. It should fit the 2GS just fine considering OEM is 17x8 +50.

For the 3GS, the 300s should be OK. The 430s have larger brakes so it depends if this set has high disk or not. Other than they are 19s, they are more conservative than OEM since the OEM wheels are 18x8 +45.

phatpat

just curious, is there such thing as "too high" of an offset? ie. will the wheels noticeably stick out, etc.

brianlin87

iTrader: (11)

where in california are u located?

Neo

iTrader: (3)

Yes. With offsets, "too high" means lower number. This means +20 will "stick out" more than +50. Where the wheel lines up with the fender depends on the wheel width and the offset. There is a point where the offset number becomes too low and you will need to modify the fender or run negative offsets to make the wheel not hit the fender on bumps and dips. There is also a point where it is no longer physically possible as the wheels are just way to far out.

phatpat

whoops i meant too high as in +50, +55, +60...

so let me rephrase...is there such thing as too low (or "too conservative") of an offset that will result in an improper fitment?

beauphus

no...the higher the offset the more they will stick IN not out...the lower the offset the further out the wheel gets pushed. every car has a different limit for how low of an offset you can get without hitting the fender. for the GS low 40's to high 30's are recommended but you can go lower with some tweaking....

dani3l

People have been asking me the bolt pattern, here it is : 5x114.3

For the record, there will be no rubbing issues whatsoever. These wheels are low maintence since they can be rotated just like stock rims from the manufacturer and these rims fit just about every japanese car(5 lug that is).

Next question, "what is riverside traffic star?"-

They are a Japanese domestic market rim which are hand made, forged, supper chrome aka. triple chromed(mirror like finished).
This company went out of business a year ago because hardly anyone could afford their prices. The current maya rims cost about $100 less per rims but are made in the US and looks cheaper.

Each rim has a signature on the spoke and a polish center cap with the engraved traffic star logo.